Pioneer PDP-501MX Manuel d'utilisateur télécharger pdf (Page 92)

Integrator Mode

Screen 1

]

MENU – –

WHITE BALANCE

SCREEN

3ADDITIONAL SET UP

TOTAL INITIALIZE

PICTURE

Screen 2

]

ADDITIONAL SET UP – –

COLOUR MODE : 1

3BAUD RATE : 4800BPS

HOUR METER : 00123

MIRROR MODE : OFF

EXIT

STD-RGB : OFF

SIDE MASK ADJ.

1 Enter Integrator mode (refer to “5.4.1 About Integrator

Mode”).

The ID number of the set of adjustment items will be

indicated in the upper right corner of the screen, where

“– –” is displayed in the illustration.

Select ADDITIONAL SET UP.

2 Move the cursor to BAUD RATE and select the desired value

with the SET button.

You can cycle through the available values by repeatedly

pressing the SET button: 1200BPS = 2400BPS = 4800BPS

= 9600BPS = 19200BPS =

BAUD RATE applies to each input (INPUTs 1-4) without

exception. All inputs are immediately switched to the baud

rate set in step 2.

Select EXIT in screen 2 to return to screen 1.

5) Setting the Baud Rate

When controlling or adjusting the unit from a PC, the RS-232C port can be set to one of five baud rates: 1200, 2400,

4800, 9600 and 19200 bps. The factory-preset value is 4800 bps.

Set the unit baud rate to match that of the PC in use. With long RS-232C cables, we recommend using lower baud

rates.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 114 115

Pas de commentaire

Pioneer PDP-501MX Manuel d'utilisateur Page 92