Pioneer VSX-AX3-S Manuel d'utilisateur télécharger pdf (Page 42)

Setting Up for Surround Sound

Speaker Distance

Adding a slight delay to some speakers is necessary to achieve proper sound depth, separation as well as an

effective surround sound effect. You need to figure out the distance from your listening position to your speakers to

add the proper delay. The following steps show you how to set the delay time for each channel by specifying the

distances from your listening position to each speaker. Once you specify the speaker distances (or it is done

automatically in the Easy Setup Guide), the receiver calculates the correct delay times automatically. If continuing

from CHANNEL LEVEL go to step 1. If starting fresh, complete steps 1–2 on page 38.

1 The SPEAKER DISTANCE should be

selected. If it isn’t use the  buttons to

select it. Press the ENTER button.

The setup possibilities appear on your TV.

2 Select each speaker channel with the

 buttons and press ENTER.

3 Use the  buttons to add or subtract

the distance in feet that the speaker is

from your normal listening position.

Press the ENTER button.

Adjust the speaker distance in 0.1m increments from 0.1 to

9.0 m.

The default setting is 2.0 m.

4 Repeat steps 2 and 3 for all speaker

channels.

5 Use the  buttons to select EXIT and

press ENTER.

If you want to change a setting before proceeding

start over from step 1.

6 Press the SYSTEM SETUP button to

leave the SYSTEM SETUP mode.

1-5 6

00_VSX-AX3.book Page 42 Monday, May 19, 2003 1:05 PM

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 103 104

Pas de commentaire

Pioneer VSX-AX3-S Manuel d'utilisateur Page 42