Pioneer VSX-422-S Manuel d'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
Controls and displays
1
1
7
13
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (page 17
).
Display
14
PHASE
Lights when the Phase Control is switched on (page 25).
15
AUTO
Lights when the Auto Surround feature is switched on
(page 23
).
16
Tuner indicators
RDS – Lights when an RDS broadcast is received
(page 22
).
ST – Lights when a stereo FM broadcast is being received
in auto stereo mode (page 21
).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is registered
or called.
MEM – Blinks when a radio station is registered.
kHz/MHz – Lights when the character display is showing
the currently received AM/FM broadcast frequency.
17
Speaker indicators
Shows if the speaker system is on or not (page 6).
SPA means the speakers are switched on.
SP means the speakers are switched off.
18
Sleep timer indicator
Lights when the receiver is in sleep mode (page 8).
19
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type,
etc.
20
Character display
Displays various system information.
21
DTS indicators
DTS – Lights when a source with DTS encoded audio
signals is detected.
HD – Lights when a source with DTS-EXPRESS or DTS-HD
encoded audio signals is detected.
ES – Lights to indicate DTS-ES decoding.
96/24 – Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver is
on, this lights to indicate NEO:6 processing (page 23
).
22
Dolby Digital indicators
2 D – Lights when a Dolby Digital encoded signal is
detected.
2 D+ – Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
2HD – Lights when a source with Dolby TrueHD encoded
audio signals is detected.
EX – Lights to indicate Dolby Digital EX decoding.
2PLII(x) – Lights to indicate 2 Pro Logic II/2 Pro Logic
IIx decoding. Light will go off during 2 Pro Logic IIz
decoding (see Listening in surround sound
on page 23 for
more on this).
23
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see Using the Advanced surround
on page 24 for
more on this).
24
SIGNAL SELECT indicators
DIGITAL – Lights when a digital audio signal is selected.
Blinks when a digital audio signal is selected and selected
audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI input
is not provided.
25
Up Mix/DIMMER indicator
Lights when the Up Mix function is set to ON (page 25). Also,
lights when DIMMER is set to off.
26
DIR.
Lights when the DIRECT or PURE DIRECT mode is switched
on (page 24
).
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Commentaires sur ces manuels

Pas de commentaire