Pioneer S-51W Manuel d'utilisateur télécharger pdf (Page 6)

6

En

PANEL FACILITIES

FRONT PANEL

REAR PANEL

1 Power Indicator (STANDBY/ON)

Lights blue when the power has been

switched ON.

NOTE:

• The power is still supplied even when the

power indicator is off. The power plug

(interrupter) must be unplugged in order to

completely cut the power supply. When not

using this product for long periods of time,

such as when traveling, unplug the power

cord (interrupter) from the power outlet for

safety purposes. Failure to do so could lead

to fire.

2 Power switch (POWER)

Switches the subwoofer between ON and

OFF.

3 Volume knob (VOLUME)

Sets the subwoofer volume.

• Turn the knob slowly from the MIN

position.

• With this unit, the bass level can be

independently set, so do not turn up the

bass on the AV amplifier.

4 Auto Standby switch (AUTO STANDBY)

Turning the Auto Standby function on or

off.

NOTE:

• The default setting for Auto Standby switch

is ON.

Auto standby function

The power is automatically set to the standby

mode (off) if there is no input signal for

approximately 12 minutes (the power

indicator turns red). The power automatically

turns on when a signal is input. The auto

standby function is deactivated when Auto

Standby switch is set to OFF.

NOTE:

• There may be cases where a connected

component outputs noise or some other

non-audio signal which causes this system

to automatically power on when in Auto

Standby mode. If this happens, switch off

the Auto Standby mode and switch the

system on/off manually.

5 Phase switch (PHASE)

When set to 180

°, the output phase

becomes the reverse of the input signal,

and when set to 0

°, it is in the same phase

as the input signal.

• Normally, the switch is set to 0

°.

But when the sound connection

between the subwoofer and the left and

right speakers sounds unnatural, try

switching to 180

° and set the switch in

the position where the sound is natural.

6 Line Level Input terminal (LINE IN)

Connect to the SUBWOOFER PREOUT

terminal of an amplifier or receiver, with the

specially provided RCA plug cord.

7 AC CORD

Connect the AC cord to a AC socket (in the

room).

1

STANDBY/ON

3

5

7

4

6

2

01_S_51W_En.book 6 ページ２００９年６月４日　木曜日　午後２時４８分

1 2 3 4 5 6 7 8 9 10 11 ... 97 98

Commentaires sur ces manuels

Pas de commentaire