Pioneer BCS-727 Manuel d'utilisateur télécharger pdf (Page 47)

Connecting 47

En

Connecting

2

Wireless network connection

Another connection option is to use an

Access Point or a wireless router. The network

configuration and connection method may vary

depending on the equipment in use and the

network environment.

This player is equipped with an IEEE 802.11n

(Single band, 2.4 GHz band) wireless module,

which also supports the 802.11b/g standards.

For the best wireless performance, we

recommendusingaIEEE802.11ncertifiedWi-

Fi network (access point or wireless router).

Wireless

Communication

PC and/or

DLNA certified server

Access Point or

WirelessRouter

Broadband

service

Refer to the setup instructions supplied with

your access point or wireless router for detailed

connection steps and network settings.

For best performance, a direct wired connection

from this player to your home network’s router

or cable/DSL modem is always the best option.

If you do chose to use the wireless option, note

that performance can sometimes be affected

by other electronic devices in the home.

Wireless network setup

For the wireless network connection, the player

needs to be set up for network communication.

This adjustment can be done from the

[Setup]

menu. Adjust the

[NETWORK]

setting as follow.

Setting up the access point or the wireless

router is required before connecting the player

to the network.

Preparation

Before setting the wireless network, you need

to:

- connect the broadband internet to the

wireless home network.

- set the access point or wireless router.

- note the SSID and security code of the

network.

1. Select

[Initial Setup]

d

[Network]

d

[Interface]

d

[Wireless]

and press

ENTER

.

2. Select

[Initial Setup]

d

[Network]

d

[Wireless Setting]

d

[Next Screen]

and

press

ENTER

.

3. Select

[Yes]

and press

ENTER

to continue.

The new connection settings reset the

current network settings.

4.

[Wireless Setting]

menu is displayed.

Use

/

to select

[Scan]

. Then select

[Next]

using the

/

and press

ENTER

.

5. The player scans the all available access

points or wireless routers within range and

display them as a list. Use

/

to select an

access point or wireless router on the list,

and then press

ENTER

.

If you have security on your access point

orwirelessrouter,verifythattheWEPor

WPAkeythatwasenteredintotheplayer

matches the router’s information exactly.

You need to input the security code as

necessary.

6. How to enter the security code.

1

Select the security code section using

/

/

/

and press

ENTER

to start the

software keyboard.

2

Use

/

/

/

to select characters and

items, and then press

ENTER

to input.

3

Select

[abc]

,

[ABC]

, or

[!@#$]

using

/

/

/

to switch to lower case characters,

upper case characters, or symbols.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 587 588

Commentaires sur ces manuels

Pas de commentaire