Pioneer AVH-P3100DVD Manuel d'utilisateur télécharger pdf (Page 51)

# When no subwoofer is connected to the rear

output, select Full (full-range speaker).

# When a subwoofer is connected to the rear

output, select Subwoofer (subwoofer).

# When the rear output setting is Subwoofer,

you cannot operate the following procedure.

3 Touch c or d next to Preout to switch

the subwoofer output or rear output.

Touching c or d will switch between

Subwoofer and Rear and that status will be

displayed.

Notes

! Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to Using subwoofer output on page

44).

! If you change this setting, subwoofer output

in the audio menu will return to the factory

settings.

! Both rear speaker lead outputs and RCA rear

output are switched simultaneously in this

setting.

Changing languages for

CAUTION

Some operations on this unit are prohibited

while driving or needs to be paid a careful at-

tention when operating. In such case, a cau-

tion appears on the display. You can change

the language of the cautions at this setting.

% Touch Caution Language on the initial

menu to select your desired language.

Each time you touch Caution Language it se-

lects languages for CAUTION in the following

order:

English (English)— Español (Spanish)—

Français (French)

Switching the sound

muting/attenuation

Sound from this system is muted or attenu-

ated automatically when the signal from the

equipment with mute function is received.

! Sound from this system returns to normal

when the muting or attenuation is can-

celed.

% Touch TEL on the initial menu to select

the setting.

Touch TEL until the desired setting appears in

the display.

! Mute – Muting

! ATT-20dB – Attenuation (ATT-20dB has a

stronger effect than ATT-10dB)

! ATT-10dB – Attenuation

! Off – Turn the sound muting/attenuation

off

Notes

! The sound is turned off, Mute is displayed

and no audio adjustments are possible.

! The sound is attenuated, ATT is displayed and

no audio adjustments, except volume control,

are possible.

! Operation returns to normal when the phone

connection is ended.

Entering PIN code for

Bluetooth wireless connection

To connect your cellular phone to this unit via

Bluetooth wireless technology, you need to

enter PIN code on your phone to verif y the

connection. The default code is 0000, but you

can change this in this function.

! With some Bluetooth audio players, you

may be required to enter the Bluetooth

audio player PIN code in advance to set

this unit for a connection.

! You can only operate this function when

Bluetooth adapter (e.g. CD-BTB200) is con-

nected to this unit.

Initial Settings

En

51

Section

15

Initial Settings

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 115 116

Commentaires sur ces manuels

Pas de commentaire