Pioneer AVH-P3100DVD Manuel d'utilisateur télécharger pdf (Page 45)

Using the high pass filter

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, turn on the

HPF (high pass filter). Only frequencies higher

than those in the selected range are output

from the front or rear speakers.

1 Touch High Pass Filter on the audio

function menu.

2 Touch d next to High Pass Filter to turn

high pass filter on.

# To turn high pass filter off, touch c.

3 Touch c or d next to Frequency to se-

lect cut-off frequency.

Each time you touch c or d selects cut-off fre-

quencies in the following order:

50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies higher than those in the se-

lected range are output from the front or rear

speakers.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the FM volume level,

which remains unchanged.

1 Compare the FM volume level with the

level of the source you wish to adjust.

2 Touch Source Level Adjuster on the

audio function menu.

3 Touch c or d to adjust the source vo-

lume.

Each time you touch c or d it increases or de-

creases the source volume.

+4 to –4 is displayed as the source volume is

increased or decreased.

Notes

! The AM volume level can also be adjusted

with source level adjustments.

! Video CD, CD, compressed audio and DivX

are set to the same source level adjustment

volume automatically.

! iPod and USB storage device are set to the

same source level adjustment volume auto-

matically.

! External unit 1 and external unit 2 are set to

the same source level adjustment volume

automatically.

Audio Adjustments

En

45

Section

13

Audio Adjustments

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 115 116

Commentaires sur ces manuels

Pas de commentaire