08
Customising preferences
Chapter
43
Engb
Customising preferences
❐ Immediately verify whether the display
changes to a rear view camera image when
the gearstick is moved to REVERSE (R) from
another position.
❐ When the screen changes to full-screen rear
view camera image during normal driving,
switch to the opposite setting in “
Camera
Polarity
”.
1 Display the “System” screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Camera Polarity].
You can select the following polarity:
Off (default): When the rear view camera
is not connected to this product.
Battery: When the polarity of the con-
nected lead is positive while the gearstick
is in the REVERSE (R) position.
Ground: When the polarity of the con-
nected lead is negative while the gear-
stick is in the REVERSE (R) position.
Setting the video signal
You can select the suitable video signal setting
for your country.
❐ As this function is initially set to “
Auto”, the
product will automatically adjust the video
signal setting.
However, the screen may turn black or im-
ages may not be displayed properly when
“
Auto” has been selected and the recep-
tion is weak. Normally, select the appropri-
ate TV signal.
❐ Regarding your country TV signal, consult
with your nearest Pioneer dealer.
❐ You can operate this function only for the
video signal input into the AV input.
1 Display the “System” screen.
➲ For details, refer to Customising the system
settings on page 38.
2 Tap [Video Signal Setting].
The “Video Signal Setting” screen appears.
•
•
•
3 Tap
or to select the desired video
signal.
Auto (default)
— PAL — NTSC — PAL-M —
PAL-N — SECAM
Adjusting the picture
You can adjust the brightness, contrast, colour,
hue, dimmer and temperature for each source
and rear view camera.
1 Playback the source you want to adjust
the picture.
2 Display the “System” screen.
➲ For details, refer to Customising the system
settings on page 38.
3 Tap [Picture Adjustment].
The picture adjustment screen appears.
4 If you are adjusting the picture adjust-
ment, select the unit.
Rear View
: Adjusts the picture for the
rear view camera.
Source: Adjusts the picture for the
source. The current source name is dis-
played on the picture adjustment screen.
5 Tap any of the following touch panel
keys to select the function to be adjusted.
Picture adjustment items are displayed.
Brightness: Adjusts the black intensity.
Contrast: Adjusts the contrast.
Color: Adjusts the colour saturation.
Hue: Adjusts the tone of colour (red or
green is emphasized).
Dimmer: Adjusts the brightness of the
display.
Temperature: Adjusts the colour temper-
ature, resulting in a better white balance.
•
•
•
•
•
•
•
•
Commentaires sur ces manuels