Pioneer DEH-6250BT Manuel d'utilisateur télécharger pdf (Page 17)

Phone FU NC (phone function)

You can set Auto ANSR and Ring tone from this

menu. For details, refer to Function and operation on

this page.

Function and operation

1 Display Phone FUNC.

Refer to Phone FUNC (phone function) on this

page.

2 Press M.C. to display the function

menu.

3 Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

Auto ANSR (automatic answering)

1 Press M.C. to turn automatic answering on or off.

Ring tone (ring tone select)

1 Press M.C. to turn the ring tone on or off.

Audio Adjustments

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select AUDIO.

3 Turn M.C. to select the audio function.

After selecting, perform the following proce-

dures to set the audio function.

FAD/BAL (fader/balance adjustment)

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between fader and balance.

3 Turn M.C. to adjust the speaker balance.

Adjustment range (front/rear): F-F15 to F-R15

Adjustment range (left/right): B-L15 to B-R15

! Select F-0 when only using two speakers.

Preset EQ (equalizer recall)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select an equalizer curve.

Powerful—Natural—Vocal—Custom1—Cus-

tom2—Flat—Super bass

! When Flat is selected no adjustments are

made to the sound.

3 Press M.C. to confirm the selection.

Graphic EQ (equalizer adjustment)

You can adjust the currently selected equalizer curve

setting as desired. Adjusted equalizer curve settings

are stored in Custom1 or Custom2.

! A separate Custom1 curve can be created for

each source. If you make adjustments when a

curve other than Custom2 is selected, the equali-

zer curve settings will be stored in Custom1.

! A Custom2 curve that is common for all sources

can be created. If you make adjustments when

the Custom2 curve is selected, the Custom2

curve will be updated.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between equalizer band and

level.

3 Press M.C. to switch to equalizer band and then

turn M.C. to select.

100Hz—315Hz—1.25kHz—3.15kHz—8kHz

4 Press M.C. to switch to level and then turn M.C.

to adjust.

Adjustment range: +6 to –6

Loudness (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

OFF (off)—Low (low)—Mid (mid)—High (high)

3 Press M.C. to confirm the selection.

SW setting 1 (subwoofer on/off setting)

English

Section

Operating this unit

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Pioneer DEH-6250BT Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Multimédia automobile Pioneer DEH-6250BT