Pioneer AVIC-HD3-II Manuel d'utilisateur télécharger pdf (Page 133)

% Touch [Auto ANT] in System Settings

menu.

Touching [Auto ANT] switches between

[Power] and [Radio].

p Regardless of whether [Power]or[Radio]

is selected, turning off the ignition switch

will cause the aerial to automatically retract

or turn off.

Setting the clock display on the

video image

You can select whether to display the clock on

the video image screen without touch panel

keys, such as DVD-Video, AV INPUT, or TV

tuner.

% Touch [Clock DISP] in System Settings

menu.

Touching [Clock DISP] switches between

[All SCRN] and [Audio SCRN].

! All SCRN — The clock is overlaid on the

“Video image”

! Audio SCRN — The clock is not overlaid on

the “Video image”

Setting the CD recording mode

You can set whether to start recording tracks

automatically when you play a CD, or to manu-

ally trigger recording.

% Touch [REC Mode] in System Settings

menu.

Each touch of [REC Mode] changes the set-

tings as follows:

! Auto — Records the tracks automatically

when a CD is played

! Manual — Lets you select the tracks you

want to record manually, and records them

! Single — Automatically records only the

first track of the CD

Setting the rear output and

subwoofer controller

The navigation system’s rear output can be

used for full-range speaker or subwoofer con-

nection. If you switch Rear SP setting to

Sub.W, you can connect a rear speaker lead

directly to a subwoofer without using an auxili-

ary amp.

Initially, the navigation system is set for rear

fullrange speaker connection. When rear out-

put is connected to full-range speakers (when

Rear SP setting is Full), you can connect the

RCA subwoofer output (SUBWOOFER OUT-

PUT or NON-FADING OUTPUT) to a subwoofer.

In this case, you can select whether to use the

subwoofer controller’s (low pass filter, phase)

built-in amp of the navigation system or the

auxiliary amp or subwoofer.

p If you change the subwoofer controller

[Rear SP]or[Preout], [Sub Woofer]or

[Non Fading]inAudio Settings menu re-

turn to the factor y settings.

p Both rear speaker leads output and RCA

rear output are switched simultaneously in

this setting.

p Rear SP can be set only when the source is

[OFF].

1 Touch [Rear SP] in System Settings

menu.

2 Touch [Full] or [Sub.W] to switch the

rear output setting.

p When no subwoofer is connected to the

rear output, select Full. When a subwoofer

is connected to the rear speaker leads di-

rectly, select Sub.W.

3 Touch [Preout] to switch the subwoofer

output or non fading output.

p When [Rear SP] setting is Sub.W,[Preout]

is invalid.

p Even if you change this setting, there is no

output unless you turn [Non Fading]or

[Sub Woofer]inAudio Settings menu

[On].

Customising the Audio Setting related with Audio Visual

Engb

133

Chapter

14

Customising the Audio Setting related with Audio Visual

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 188 189

Commentaires sur ces manuels

Pas de commentaire