Pioneer Premier DEH-P590IB Manuel d'utilisateur télécharger pdf (Page 22)

Custom 1 Custom 1

Custom 2 Custom 2

Flat Flat

Super Bass (S.Bass) Super bass

! Custom 1 and Custom 2 are adjusted

equalizer cur ves that you create. Adjust-

ments can be made with a 7-band graphic

equalizer.

! When Flat is selected no supplement or

correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

Flat and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

Powerful—Natural—Vocal—Custom 1—

Custom 2—Flat—Super Bass (S.Bass)

Adjusting equalizer curves

The factory supplied equalizer curves, with the

exception of Flat, can be adjusted to a fine de-

gree (nuance control).

1 Use MULTI-CONTROL to select the gra-

phic equalizer adjustment.

Powerful appears in the display.

If the equalizer curve has been previously se-

lected, the curve of that previously selected

will be displayed instead of Powerful.

2 Push MULTI-CONTROL left or right to

select an equalizer curve.

Each time MULTI-CONTROL is pushed left or

right, equalizer curves are selected in the fol-

lowing order:

Powerful—Natural—Vocal—Custom 1—

Custom 2—Flat—Super Bass (S.Bass)

3 Push MULTI-CONTROL up or down to

adjust the equalizer curve.

Each time MULTI-CONTROL is pushed up or

down, the equalizer curve increases or de-

creases respectively.

+6 to –4 (or –6) is displayed as the equalizer

curve is increased or decreased.

# The actual range of the adjustments are differ-

ent depending on which equalizer curve is se-

lected.

# The equalizer curve with all frequencies set to

0 cannot be adjusted.

Adjusting 7-band graphic equalizer

For Custom 1 and Custom 2 equalizer curves,

you can adjust the level of each band.

! A separate Custom 1 curve can be created

for each source. (The built-in CD player and

the multi-CD player are set to the same

equalizer adjustment setting automati-

cally.) If you make adjustments when a

curve other than Custom 2 is selected, the

equalizer cur ve settings will be memorized

in Custom 1.

! A Custom 2 curve can be created common

to all sources. If you make adjustments

when the Custom 2 curve is selected, the

Custom 2 curve will be updated.

1 Recall the equalizer curve you want to

adjust.

See Recalling equalizer curves on the previous

page.

2 Use MULTI-CONTROL to select 7-band

graphic equalizer adjustment.

Frequency and the level (e.g., 50Hz +4) ap-

pears in the display.

3 Push MULTI-CONTROL left or right to

select the equalizer band to adjust.

Each time MULTI-CONTROL is pushed left or

right, equalizer bands are selected in the fol-

lowing order:

50Hz—125Hz—315Hz—800Hz—2kHz—

5kHz—12.5kHz

4 Push MULTI-CONTROL up or down to

adjust the level of the equalizer band.

Each time MULTI-CONTROL is pushed up or

down, the level of the equalization band in-

creases or decreases.

Operating this unit

En

22

Section

02

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 130 131

Commentaires sur ces manuels

Pas de commentaire