Pioneer DEX-P99RS Manuel d'installation télécharger pdf (Page 11)

English

Installation

DIN Front-mount

Installation with the rubber bush

1. Insert the mounting sleeve into the

dashboard.

• When installing in a shallow space, use a

supplied mounting sleeve. If there is enough

space behind the unit, use factory supplied

mounting sleeve.

2. Secure the mounting sleeve by using

a screwdriver to bend the metal tabs

(90°) into place.

3. Install the unit as illustrated.

Mounting sleeve

Dashboard

Rubber bush

Screw

4. Attach the trim ring.

Note

• Attach the trim ring with the grooved side facing

down.

Removing the Unit

1. Insert the supplied extraction keys

into both sides of the unit until they

click into place.

2. Pull the unit out of the dashboard.

DIN Rear mount

1. Determine the appropriate position

where the holes on the bracket and

the side of the unit match.

2. Tighten two screws on each side.

• Use either truss screws (5 mm × 8 mm)

or flush surface screws (5 mm × 9 mm),

depending on the shape of screw holes in the

bracket.

Screw

Factory radio mounting bracket

Dashboard or

Console

Fastening the front panel

If you do not plan to detach the front panel,

the front panel can be fastened with supplied

screw.

Fixing screw

Release knob

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 98 99

Commentaires sur ces manuels

Pas de commentaire

Pioneer DEX-P99RS Manuel d'installation Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs de médias en voiture Pioneer DEX-P99RS