Pioneer DEH-600BT Manuel d'utilisateur télécharger pdf (Page 20)

Bluetooth Audio

Important

! Depending on the Bluetooth audio player con-

nected to this unit, the operations available

with this unit are limited to the following two

levels:

— Lower level: Only playing back songs on

your audio player is possible.

— Higher level: Playing back, pausing, select-

ing songs, etc., are possible (all the opera-

tions illustrated in this manual).

! Since there are a number of Bluetooth audio

players available on the market, operations

with your Bluetooth audio player using this

unit vary extensively. Refer to the instruction

manual that came with your Bluetooth audio

player as well as this manual while operating

your player on this unit.

! Information about songs (e.g. the elapsed

playing time, song title, song index, etc.) can-

not be displayed on this unit.

! While you are listening to songs on your Blue-

tooth audio player, refrain from using on your

cellular phone as much as possible. If you use

your cellular phone, the signal from your cel-

lular phone may cause noise on the song play-

back.

! When you are talking on a cellular phone con-

nected to this unit via Bluetooth wireless tech-

nology, song playback from your Bluetooth

audio player connected to this unit is muted.

! Even if you are listening to a song on your

Bluetooth audio player and you switch to an-

other source, song playback continues.

Connecting a Bluetooth audio

player

! Before you can use audio players you may

need to enter the PIN code into this unit. If

your player requires a PIN code to establish

a connection, look for the code on the

player or in its accompanying documenta-

tion. Refer to Entering PIN code for Blue-

tooth wireless connection on page 43.

Using a Bluetooth audio player to

initiate a connection

1 Press MULTI-CONTROL to display the

main menu.

2 Use MULTI-CONTROL to select

CONNECTION.

Turn to change the menu option. Press to se-

lect.

# You can also select this menu by pressing and

holding PHONE/

/CONNECT on the ordinary

display.

3 Turn MULTI-CONTROL to select

BT AUDIO DEVICE.

# If there is previous connection log in this unit,

you can select the Bluetooth device from

PAIRED DEVICE.

Refer to Connecting a paired Bluetooth audio

player.

4 Use MULTI-CONTROL to select a group.

Push MULTI-CONTROL up or down to select a

group.

NOKIA (Nokia)—STANDARD (standard)

# Normally select STANDARD. If the device of

Nokia is not paired to this unit, select NOKIA.

# Push MULTI-CONTROL left or right to display

a group name or an ID.

5 Press MULTI-CONTROL to open the con-

nection.

READY will be displayed.

# This unit is now on standby for connection

from Bluetooth audio player.

# Push MULTI-CONTROL left or right to display

the device name, BD address and PIN code of

this unit.

6 Use your Bluetooth audio player to es-

tablish connection.

PIN code is set to 0000 as the default. You can

change this code in the initial setting. Refer to

Entering PIN code for Bluetooth wireless con-

nection on page 43.

While connecting, CONNECTING is displayed.

If the connection is established, CONNECTED

is displayed.

Operating this unit

En

20

Section

02

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 50 51

Commentaires sur ces manuels

Pas de commentaire