Pioneer AVH-P2300DVD Manuel d'utilisateur télécharger pdf (Page 8)

http://www.pioneerelectronics.com

1 Register your product. We will keep the details

of your purchase on file to help you refer to

this information in the event of an insurance

claim such as loss or theft.

2 Receive updates on the latest products and

technologies.

3 Download owner’s manuals, order product

catalogues, research new products, and

much more.

4 Your feedback is important in our continual ef-

fort to design and build the most advanced,

consumer-focused product in the industry.

Serial number

Resetting the microprocessor

By pressing RESET, you can reset the micro-

processor to its initial settings without chan-

ging the bookmark information.

The microprocessor must be reset in the fol-

lowing situations:

! Before using this unit for the first time after

installation

! If the unit fails to operate properly

! When strange or incorrect messages ap-

pear on the display

1 Turn the ignition switch OFF.

2 Press RESET with a pen tip or other

pointed instrument.

RESET button

Note

Switch your engine ON or set the ignition switch

to ACC ON before pressing RESET in the follow-

ing situations:

! After completing connections

! When erasing all stored settings

! When resetting the unit to its initial (factory)

settings

Demo mode

The feature demo automatically starts when

you select Off for the source and continues

while the ignition switch is set to ACC or ON.

To cancel the feature demo, press and hold

MUTE. Press and hold MUTE again to restart.

Operating the feature demo while the car en-

gine is turned off it may drain the battery

power.

Important

Failure to connect the red lead (ACC) of this unit

to a terminal coupled with ignition switch on/off

operations may lead to battery drain.

Adjusting the response

positions of the touch panels

(Touch Panel Calibration)

If you feel that the touch panel keys on the

screen deviate from the actual positions that

respond to your touch, adjust the response po-

sitions of the touch panel. Refer to Adjusting

the response positions of the touch panels

(Touch Panel Calibration) on page 57.

Use and care of the remote

control

Installing the battery

Slide the tray on the back of the remote con-

trol out and insert the battery with the plus (+)

and minus (–) poles aligned properly.

En

8

Section

02

Before you start

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 87 88

Commentaires sur ces manuels

Pas de commentaire