Pioneer SVM-1000 Manuel d'utilisateur télécharger pdf (Page 33)

USING THE JPEG VIEWER

Operating in FADER MODE

Using the JPEG images in the JPEG BOX, a slide show can be

created with transitions between images at chosen intervals. The

channel fader for the assigned channel is used to perform the

transitions.

1 Touch the [FADER MODE] button to select FADER mode.

2 Select the images you wish to use from the JPEG BOX.

Touch multiple images on the screen and their borders will

change to white. Touch again to deselect images.

3 Select the channel to which you wish to assign the images.

Touch the channel select button for the channel to which you

wish to assign the images, and the image at the upper left of

the group of selected images will be displayed on the channel

monitor.

4 Operate the fader.

Each time the channel fader for the assigned channel is raised

from the [0] point, the images will change.

Deleting JPEG files downloaded to the JPEG BOX

1 Touch the [CLEAR] button.

The [CLEAR] button will flash.

2 Touch the images on the screen that you wish to delete.

The instant the image is touched, it disappears from the JPEG

BOX. While the [

CLEAR

] button is flashing, you may continue

by deleting other images if desired.

•This process does not affect file data on attached SD car ds

or USB memory devices.

3 Press the [CLEAR] button once again to leave this mode.

• Usable JPEG files have a maximum size of 7 MB or about 12

MP.

•If the original JPEG file does not fit within 640 x 480 pixels,

the file will be automatically resized to 640 x 480 pixels when

downloaded to the SVM-1000.

SVM-1000_B_En.book 33 ページ２００７年１１月２６日　月曜日　午後１２時５４分

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Pas de commentaire

Pioneer SVM-1000 Manuel d'utilisateur Page 33