Pioneer SVM-1000 Manuel d'utilisateur télécharger pdf (Page 18)

USING THE EFFECT FUNCTION

1 Touch the [BPM AUTO/TAP] button to select the BPM (=Beat

Per Minute) measurement mode.

AUTO: The BPM is automatically measured from the input

music signal.

TAP: Tap the TAP button with your finger to manually input the

BPM.

• Whenever power is first turned ON, [AUTO] is selected by

default.

•The selected mode ([AUTO]/[TAP]) will appear in the

display.

• When a BPM cannot be measured automatically, the BPM

display in the display will flash.

•The measurement range of AUTO mode is BPM=70 to 180.

Depending on the track, the BPM may not be accurately

measured. In these cases, use TAP mode to manually enter

the BPM.

[Manually entering the BPM using the TAP button]

When the TAP button is tapped to the beat (a quarter note) more

than twice, the average length will be set as the BPM.

•Pr essing the TAP button during [AUTO] mode will switch the

BPM measurement mode to [TAP], and the length between the

taps will be measured.

• When a BPM is set using the TAP button, the multiplication

factor will become [1/1] or [4/1] (depending on the effect), and

the effect time will be set to either the length of 1 beat (a quarter

note) or 4 beats.

• Rotate the TIME/PARAMETER dial while pressing the TAP

button to set the BPM directly.

•Touch the [BPM AUTO/TAP] button to return to [AUTO] mode.

2 Touch the effect category button [BEAT].

•The [BEAT] button will light brightly, and the icon will move

as an animation.

• The BEAT effect screen will be displayed.

• Whenever power is first turned ON, the [BEAT] effect is

selected by default.

3 Use the effect select buttons to select an effect type.

• The selected button will appear white, and the icon will move

as an animation.

•For a description of each effect, refer to P. 23.

4 Use the CH SELECT dial to select the channel to which you

wish to apply the effect.

• The selected effect channel display will appear white.

•If [MIC] is selected, the audio effect will be applied to both

MIC 1 and MIC 2. There will be no effect on the video.

• When turning the power ON, [MASTER] will be selected.

5 Touch the effect mode select button to select the effect

mode.

• The selected button will appear white, and the icon will move

as an animation.

A: The effect will be applied to the audio only.

AV: The effect will be applied to both the audio and video.

V: The effect will be applied to the video only.

• When turning the power ON, [AV] will be selected.

6 Touch the beat button to choose the multiplication factor of

the beat for synchronization of the effect.

• Select the beat number calculated from the BPM.

• The selected beat button will be highlighted.

• An effect time that corresponds to the multiplication factor

of the beat will be automatically set.

[Example] When BPM=120

1/1 = 500 ms

1/2 = 250 ms

2/1 = 1000 ms

7 Set the EFFECT ON/OFF button to ON to apply the effect.

• Each time the button is pressed it will switch between ON

and OFF (whenever power is first turned ON, the setting

defaults to OFF).

• When effect is ON, the button flashes.

Video effect pattern

Rotate the VIDEO FX PATTERN/TEXT BANK dial to select a video

effect pattern for the selected video effect.

For descriptions on the video effect pattern change caused by

rotating the VIDEO FX PATTERN/TEXT BANK dial, refer to P. 24.

Parameter 1

Rotate the TIME/PARAMETER dial to adjust temporal parameters

of the selected effect.

For descriptions on the changes in parameter 1 caused by turning

the TIME/PARAMETER dial, refer to P. 23.

Parameter 2

Rotate the LEVEL/DEPTH dial to adjust quantitative parameters of

the selected effect.

For descriptions on the changes in parameter 2 caused by rotating

the LEVEL/DEPTH dial, refer to P. 23.

Using the visualizer

This function allows the use of images produced internally by the

unit.

1 Set [VISUALIZER] button to [ON].

The video effect monitor disp lays the image.

2 Use the effect select buttons to choose a desired image.

3 Use the CH SELECT dial to select the desired channel.

• The image will move automatically in rhythm to the music’s

beat.

• In the event no input image is present, the visualizer’s image

can be used.

SVM-1000_B_En.book 18 ページ２００７年１１月２６日　月曜日　午後１２時５４分

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Pioneer SVM-1000 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Pioneer SVM-1000