Pioneer PDP-5080HD Manuel d'utilisateur télécharger pdf (Page 60)

Adjustments and Settings

About “Option” menus

The “Option” menu consists of two screens. To select the desired

menu, press / repeatedly to switch between Screen 1 and

Screen 2. The current screen number appears at the top right

corner on the screen.

(For AV source)

Image position adjustment

(AV source only)

Adjusts the horizontal and vertical positions of images on the

plasma display.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Position” ( / then ENTER).

4 Select “H/V Position Adjust” ( / then ENTER).

5 Adjust the vertical position ( / ) or horizontal position

(/).

6 Press HOME MENU to exit the menu.

Note

• To restore the factory defaults for all the items, press / to

select “Reset” in step 4, and then press ENTER. A confirmation

screen appears. Press / to select “Yes”, and then press

ENTER.

• Adjustments are stored separately for each input source.

• Depending on the displayed video, the image position may not

change even after adjustment.

Automatic image position and clock

adjustments (PC source only)

Use Auto Setup to automatically adjust positions and clock of

images coming from a personal computer.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Auto Setup” ( / then ENTER).

• Auto Setup starts.

4 Press HOME MENU to exit the menu.

Note

• When Auto Setup is finished, “Auto Setup completed.”

appears.

• Even when “Auto Setup completed.” appears, Auto Setup may

have failed, depending on conditions.

• Auto Setup may fail with a PC image composed of similar

patterns or monochrome. If not successful, change the PC

image and try again.

• Be sure to connect the computer to the plasma display and

switch it on before starting Auto Setup.

• Depending on the displayed video, the image position may not

change even after adjustment.

• This function is not selectable when the PC is connected to the

HDMI terminal.

Manual image position and clock

adjustments (PC source only)

Usually you can easily adjust the positions and clock of images

using Auto Setup. Use Manual Setup to optimize the positions

and clock of images when necessary.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Manual Setup” ( / then ENTER).

4 Select an item to be adjusted ( / then ENTER).

5 Perform adjustment ( / or / ).

• With “Clock” or “Phase” selected, you can change the

parameter using / .

6 Press HOME MENU to exit the menu.

Option

Position

Auto Size

Side Mask

HDMI Input

HDMI Control Setting

Blue LED Dimmer

Orbiter

Video Pattern

1/2

Auto

Wide-Zoom

Option

Digital Audio Out

Language

Tuner NR Setting

Game Control Pref

Room Light Sensor

2/2

Off

Dolby Digital

Position

H/V Position Adjust

Reset

Option

Auto Setup

Manual Setup

H/V Position Adjust

Clock

Phase

Reset

PDP5080HD.book Page 60 Monday, April 9, 2007 7:49 PM

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 284 285

Commentaires sur ces manuels

Pas de commentaire

Pioneer PDP-5080HD Manuel d'utilisateur Page 60

Commentaires sur ces manuels

Produits connexes et manuels pour Télévisions Pioneer PDP-5080HD