Pioneer PDP-5080HD Manuel d'utilisateur Page 22

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 285
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 21
22
En
Preparation
05
Attaching/detaching the Pioneer stand
The plasma display comes with the Pioneer table top stand
attached. You can also install the display on a rack by detaching
the stand. The method for attaching/detaching the stand varies
depending on the product.
Caution
This product can be used only with the attached stand. Using
other stands can result in instability, possibly causing injury.
The weight of a 50 inch plasma display is about 34.8 kg (76.7
lbs.) and a 42 inch about 29.9 kg (65.9 lbs.), it has no depth, and
is unstable. Therefore, at least two people must assemble and
install it.
Detaching the stand
1 Detach the supplied speaker if it has already been
installed.
To detach the speaker, remove the cable wiring for the
speaker at the rear and screws at the rear of the speaker
and pull it out (see step 3 on page 18).
Use the protective sheet in which the speaker was
wrapped between the speaker and stand.
Make sure to remove the speaker mounting fittings.
2 With the plasma display lying flat, loosen and remove
the two installation bolts (1) and (2) using a
screwdriver.
Installation bolts (1): M8 x 23 mm (black) for PDP-4280HD
M8 x 23 mm (black) for PDP-5080HD
Installation bolts (2): M8 x 60 mm (black) for PDP-4280HD
M8 x 40 mm (black) for PDP-5080HD
3 Remove the stand from the plasma display.
Note
Make sure to keep the installation bolts (1) and (2) that have
been removed as they are re-used when attaching the stand to
the plasma display.
Place a sheet or protective cover to protect the display from
scratches or damage.
Work only with the plasma display lying flat on a table or similar
surface.
When lying the plasma display down, be careful not to scratch
or damage it.
When removing the stand before you install the speaker,
begin with step 2 (for PDP-5080HD).
Begin with step 2 for PDP-4280HD.
Besides the speaker, steps for detaching the stand are the
same for PDP-5080HD and PDP-4280HD. Illustrations
shown are for PDP-5080HD.
Installation bolts (1)
(Step 1)
Installation bolts (2)
(Step 2)
Table top stand
Sheet
PDP5080HD.book Page 22 Monday, April 9, 2007 7:49 PM
Vue de la page 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 284 285

Commentaires sur ces manuels

Pas de commentaire