Pioneer X-SMC01BT-S Manuel d'utilisateur télécharger pdf (Page 28)

Bluetooth

® Audio playback

• Please refer to the user’s manual for your Bluetooth

capable device for details on when pairing can be

performed and the procedures required for pairing.

• When PIN code entry is requested, enter “0000”. (This

unit does not accept any PIN code setting other than

“0000”.)

4 Confirm on the Bluetooth capable device

that pairing has been completed.

If pairing with the Bluetooth capable device has been

completed correctly, the name of the Bluetooth capable

device will be displayed on the front panel of the unit. (Only

single-byte alphanumeric characters can be displayed. Any

character that cannot be displayed will be indicated by a “*”.)

Listen to music on the unit from a

Bluetooth

capable device

1 Press the

BT AUDIO

The unit will switch to BT AUDIO input.

2A Bluetooth connection will be created

between the Bluetooth capable device and the

unit.

Procedures for connecting to the unit should be performed

from the Bluetooth capable device.

• Please refer to the user’s manual for your Bluetooth

capable device for details of the connection procedures.

3 Playback music from the Bluetooth capable

device.

Note

• When Bluetooth capable devise is not playing and no

operations have been performed for more than 20

minutes, the unit will automatically power off.

• Auto power off can be switched to ON/OFF (page 35).

BT STANDBY

The following can be done when the unit is on standby with

the BT AUDIO switched ON.

By selecting a Bluetooth capable device that already has a

connection history (pairing has already been conducted) with

this unit, this unit will automatically turn on with the BT

AUDIO function.

BT STANDBY settings

Switch ON/OFF by long pressing the BT AUDIO button

located on the top of the unit for 3 seconds.

The setting operation can only be performed by using the BT

AUDIO button on the unit. The setting cannot be performed

using the remote control.

Note

•

When the BT STANDBY is ON, “BT STANDBY ON” is

displayed on the main display.

•

When the BT STANDBY is OFF, “BT STANDBY OFF” is

displayed on the main display.

Connection while in BT STANDBY mode with

Bluetooth

capable device

When connection history (pairing has already been

conducted) with a Bluetooth capable device exists for the unit

during BT STANDBY, the unit can receive a connection

request directly from the connection history.

The unit will start using the BT AUDIO function, and connect

with a Bluetooth capable device.

Even devices that have already been paired with this unit will

not connect during BT STANDBY in the following cases.

In such cases, delete pairing history from the Bluetooth

wireless technology device and perform pairing again.

•

Up to 8 pairing history can be recorded with this unit. If

connecting to a Bluetooth wireless technology device

over 8 units, the oldest pairing history will be deleted.

• If the settings are reset to the factory setting, all pairing

history will be deleted.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 38 39

Commentaires sur ces manuels

Pas de commentaire

Pioneer X-SMC01BT-S Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer X-SMC01BT-S