Pioneer X-CM42BTD-W Manuel d'utilisateur télécharger pdf (Page 28)

Using the tuner08

Listening to the DAB+

About DAB+ (Digital Audio

Broadcasting)

Digital Audio Broadcasting is a digital transmission system

where audio signals are converted to digital signals for

broadcasting. DAB+ is broadcast as a group of data called

multiplex (ensemble) which may contain one or more stations

(services). Each station contains a primary service and there

may be one or more secondary services. This allows several

programmes or services to be transmitted on a single

frequency.

Auto Scan

When turned on for the first time, the unit scans radio

stations automatically to create a station list. You can make

the auto scan again when you move the unit to other areas or

add multiplex channels to the station list.

1 Press the

TUNER

until "DAB" appears on the

display.

2 Press DAB SCAN on the remote control for

more than 3 seconds.

Auto Scan scanning begins.

After the scan:

The stations will be stored in alphanumeric order and the first

station on the list will be selected and you will hear it through

the speakers.

• To listen to other stations, see Selecting a station in the

station list below.

Note

• If no station is found, "NO SIG" appears.

• Up to 100 appears for total received stations.

Selecting a station in the station list

Once a DAB+ station is received, you can select stations in

the station list.

1 Press the

TUNER

until "DAB" appears on the

display.

2 Whilst receiving a DAB+ station, press the

TUNE +/–

to select the desired station.

3 Within 10 seconds, press the

DAB ENTER

the remote control to tune into the desired

station.

Manual tune

You can manually store stations which Auto Scan cannot

find. If reception is poor, you can adjust the sensitivity.

Manual tune is only available after Auto tune. Perform Auto

Scan first.

1 Press the

TUNER

until "DAB" appears on the

display.

2 Press the

DAB SCAN

once.

3 Within 10 seconds, press the

TUNE +/–

select the DAB+ frequency.

4 Within 10 seconds, press the

DAB ENTER

• If the level is too low, move the aerial or unit to improve

reception.

DAB + SIGNAL

MULTIPLEX

(ENSEMBLE)

SERVICES

COMPONENTS

(STATIONS)

DISPLAY FOLDER

PRESET VOLUME

ST/MONO

MUTE

TUNE–

TUNE+

DIMMER

 







–

MEMORY

/PROGRAM

ASPM PTY

DISPLAY

RDS

ENTER

SCAN ENTER DISPLAY

DAB

X-CM32_VXE8_En.book 28 ページ２０１４年３月１２日　水曜日　午後２時５２分

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Pioneer X-CM42BTD-W Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer X-CM42BTD-W