Pioneer VSX-923-S Manuel d'utilisateur télécharger pdf (Page 89)

The System Setup and Other Setup menus

ZONE 2 setup

VSX-1123 only

When making multi-zone connections using the AUDIO ZONE 2 OUT terminals and performing playback in Zone

2, you can set whether to adjust the Zone 2 volume on the receiver or to fix it to a specific volume (–40 dB Fixed

or 0 dB Fixed). This is set to Variable upon shipment from the factory, allowing the volume to be adjusted on the

receiver. If you would like to adjust the volume from the connected amplifier, make the setting below.

! This setting is not possible if multi-zone settings have been made using the speaker terminals and

Speaker System is set to anything other than ZONE 2. In this case, adjust the volume for the sub zones on the

receiver.

CAUTION

! Note that when Volume Level is set to 0 dB Fixed, the audio output from the AUDIO ZONE 2 OUT terminals

is set to the maximum. Also, depending on the volume setting on the connected amplifier, large volumes may

be produced even when Volume Level is set to –40 dB Fixed.

1 Select ‘ZONE Setup’ from the Other Setup menu.

2 Select ‘ZONE 2’, then press ENTER.

3 Select the Volume Level setting you want.

! Variable (default) – The Zone 2 volume is adjusted from the receiver.

! –40 dB Fixed/0 dB Fixed – The Zone 2 volume level output from the receiver is fixed to the value set here.

4 When you’re finished, press RETURN.

You will return to the Other Setup menu.

On Screen Display Setup

When the receiver is operated, its status (the input name, listening mode, etc.) is displayed superimposed over

the video output on the display. This status display can be turned off by switching this setting to OFF.

! Default setting: ON

1 Select ‘On Screen Display Setup’ from the Other Setup menu.

2 Select the On Screen Display setting you want.

3 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Notes

! The on-screen display is not displayed for video outputs from the HDMI OUT 2 and VIDEO MONITOR OUT

terminals.

! Depending on the type of video input signal (4K, 3D, etc.), the on-screen display may not be displayed.

! The size of the characters displayed differs according to the output resolution.

Play ZONE Setup

VSX-1123 only

Select the zone for playing the audio contents of devices in the home network when using in the DMR mode.

! For playable DLNA-compatible network devices, see page 53.

1 Select ‘Play ZONE Setup’ from the Other Setup menu.

2 Select the zone in which you want to play the audio contents.

3 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Making network settings using Safari

1 Launch Safari on your computer.

2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver's name

(Friendly Name) (b) in Bookmark.

If Bonjour list is not displayed, access the IP address“http://(the receiver's IP address)” from Safari.

3 Click IP, Proxy Setting.

4 Setup the network settings manually and then press Apply.

Note

This setting for the network has been confirmed for Mac OS X 10.7 and Safari 5.1.

Using Safari to set a friendly name

1 Launch Safari on your computer.

2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver's name

(Friendly Name) (b) in Bookmark.

If Bonjour list is not displayed, access the IP address“http://(the receiver's IP address)” from Safari.

3 Click Friendly Name.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 114 115

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-923-S Manuel d'utilisateur Page 89

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSX-923-S