Pioneer BCS-FS505 Manuel d'utilisateur télécharger pdf (Page 28)

100

101

28 Installation

Installation

Network Setup

Before setting the wired network, you need to

connect the broadband internet to your home

network.

If there is a DHCP server on the local area

network (LAN) via wired connection, this player

will automatically be allocated an IP address.

After making the physical connection, a small

number of home networks may require the

player’s network setting to be adjusted. Adjust

the [NETWORK] setting as follows.

1. Select [Connection Setting] option in the

[Setup] menu then press ENTER (

2. Use

to select the IP mode

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP

address automatically.

NOTE

If there is no DHCP server on the network and you

want to set the IP address manually, select [Static]

then set the [IP Address], [Subnet Mask], [Gateway]

and [DNS Server] using

and numerical

buttons. If you make a mistake while entering a

number, press CLEAR to clear the highlighted part.

3. Select [OK] and press ENTER ( ) to apply

network settings.

4. The player will ask you to test the network

connection. Select [OK] and press ENTER

(

) to complete the network connection.

5. If you select [Test] and press ENTER ( )

at step 4 above, the network connection

status is displayed on the screen.

You can also test it on the [Connection

Status] in the [Setup] menu.

HB485-DB.BDEUPPK_ENG.indd 28HB485-DB.BDEUPPK_ENG.indd 28 2010-05-18  1:35:522010-05-18  1:35:52

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 423 424

Commentaires sur ces manuels

Pas de commentaire

Pioneer BCS-FS505 Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer BCS-FS505