Pioneer MVH-350BT Manuel d'utilisateur télécharger pdf (Page 17)

Common

Message Cause Action

AMP ERROR Unit fails to op-

erate or speaker

connection is

incorrect; pro-

tective circuit is

activated.

Check the speak-

er connection. If

the message fails

to disappear even

after the engine is

switched off/on,

contact your deal-

er or an author-

ized Pioneer

Service Station

for assistance.

USB storage device/iPod

Message Cause Action

FORMAT

READ

Sometimes

there is a delay

between the

start of playback

and when you

start to hear any

sound.

Wait until the

message disap-

pears and you

hear sound.

NO AUDIO There are no

songs.

Transfer the audio

files to the USB

storage device

and connect.

The connected

USB storage de-

vice has secur-

ity enabled.

Follow the USB

storage device in-

structions to dis-

able the security.

SKIPPED The connected

USB storage de-

vice contains

files embedded

with Windows

Mediaä DRM 9/

10.

Play an audio file

not embedded

with Windows

Media DRM 9/10.

Message Cause Action

PROTECT All the files in

the USB storage

device are em-

bedded with

Windows Media

DRM 9/10.

Transfer audio

files not em-

bedded with

Windows Media

DRM 9/10 to the

USB storage de-

vice and connect.

N/A USB The USB device

connected to is

not supported

by this unit.

! Connect a USB

Mass Storage

Class compliant

device.

! Disconnect

your device and

replace it with a

compatible USB

storage device.

CHECK USB The USB con-

nector or USB

cable has short-

circuited.

Check that the

USB connector or

USB cable is not

caught in some-

thing or dam-

aged.

CHECK USB The connected

USB storage de-

vice consumes

more than maxi-

mum allowable

current.

Disconnect the

USB storage de-

vice and do not

use it. Turn the

ignition switch to

OFF, then to ACC

or ON and then

connect only

compliant USB

storage devices.

Message Cause Action

CHECK USB The iPod oper-

ates correctly

but does not

charge.

Make sure the

connection cable

for the iPod has

not shorted out

(e.g., not caught

in metal objects).

After checking,

turn the ignition

switch OFF and

back ON, or dis-

connect the iPod

and reconnect.

ERROR-19 Communication

failed.

Perform one of

the following op-

erations.

–Turn the ignition

switch OFF and

back ON.

–Disconnect the

USB storage de-

vice.

–Change to a dif-

ferent source.

Then, return to

the USB source.

iPod failure. Disconnect the

cable from the

iPod. Once the

iPod’s main

menu is dis-

played, reconnect

the iPod and reset

it.

ERROR-23 USB storage de-

vice was not for-

matted with

FAT12, FAT16 or

FAT32.

USB storage de-

vice should be for-

matted with

FAT12, FAT16 or

FAT32.

Message Cause Action

ERROR-16 The iPod firm-

ware version is

old.

Update the iPod

version.

iPod failure. Disconnect the

cable from the

iPod. Once the

iPod’s main

menu is dis-

played, reconnect

the iPod and reset

it.

STOP There are no

songs in the

current list.

Select a list that

contains songs.

NOT FOUND No related

songs.

Transfer songs to

the iPod.

Bluetooth device

Message Cause Action

ERROR-10 The power failed

for the

Bluetooth mod-

ule of this unit.

Turn the ignition

switch OFF and

then to ACC or

ON.

If the error mes-

sage is still dis-

played after

performing the

above action,

please contact

your dealer or an

authorized

Pioneer Service

Station.

English

Additional information

17

Appendix

Additional information

En

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 155 156

Commentaires sur ces manuels

Pas de commentaire