Pioneer AVIC-F10BT Manuel d'utilisateur télécharger pdf (Page 84)

Receiving traffic announcements

TA (traffic announcement standby) lets you re-

ceive traffic announcements automatically, no

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an-

other enhanced network’s TP station (a station

carrying information that cross-references TP

stations).

1 Tune in a TP station or another en-

hanced network’s TP station.

When you are tuned into a TP station or an-

other enhanced network’s TP station,

in-

dicator will light.

2 Touch [TA] on the “Function” menu to

turn traffic announcement standby on.

appears in the display. The tuner will

standby for traffic announcements. If you

turned TA function on while tuned in to

neither a TP station nor another enhanced net-

work’s TP station, the

indicator lights.

To turn traffic announcements standby off,

touch [TA] again.

3 Use VOL (+/–) button to adjust the TA

volume when a traffic announcement be-

gins.

The newly set volume is stored in memory and

recalled for subsequent traffic announce-

ments.

4 Touch [Cancel] while a traffic announce-

ment is being received to cancel the an-

nouncement.

The tuner returns to the original source but re-

mains in standby mode until [TA] is touched

again.

You can also cancel the announcement by

changing the source or band.

p The system switches back to the original

source following traffic announcement re-

ception.

p Only TP stations and other enhanced net-

works’ TP stations are tuned in during seek

tuning or BSM when TA is on.

Tuning into alternative frequencies

If you are listening to a broadcast and the re-

ception becomes weak or there are other pro-

blems, the navigation system will

automatically search for a different station in

the same network that is broadcasting a stron-

ger signal.

% Touching [AF] switches between [On]

and [Off].

p AF is on as a default.

p Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

p When you recall a preset station, the tuner

may update the preset station with a new

frequency from the station’s AF list. No pre-

set number appears on the display if the

RDS data for the station received differs

from that for the originally stored station.

p Sound may be temporarily interrupted by

another programme during an AF fre-

quency search.

p AF can be turned on or off independently

for each FM band.

PI Seek operation

If the unit fails to find a suitable alternative fre-

quency, or if you are listening to a broadcast

and the reception becomes weak, the naviga-

tion system will automatically search for a dif-

ferent station with the same programming.

During the search, PI SEEK is displayed and

the output is muted. Muting is discontinued

after completion of the PI Seek, whether or not

a different station is found.

Activating the Auto PI seek for

preset stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

p The default setting for Auto PI Seek is off.

= For details, refer to Switching Auto PI seek

on page 131.

Using the radio (FM)

Engb

84

Chapter

14

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 179 180

Commentaires sur ces manuels

Pas de commentaire