Pioneer AVH-X7500BT Manuel d'utilisateur télécharger pdf (Page 49)

ENGLISH

Bluetooth connection menu

Bluetooth connection menu operations

If you are using a cellular phone that can be connected via Bluetooth wireless

technology, we recommend that you use your phone to search for this unit and

establish a connection between it and your phone. The PIN code is set to 0000 as

default. The product name for this unit will display on your phone as the device name.

For details, refer to “Entering PIN code for Bluetooth wireless connection” on page 50.

For further details concerning the procedures for establishing Bluetooth wireless

connections, refer to the instruction manual for the phone.

Pairing from this unit

1. Press the home button to switch to the home display.

2. Touch the Bluetooth key to open the Bluetooth connection menu.

3. Touch Connection to select a device.

4. Start to search.

While searching, is displayed and when available devices are found, the device

names or Bluetooth device addresses (if names cannot be obtained) are displayed.

• If you want to switch between the device names and Bluetooth device addresses,

touch the icon.

• To cancel searching, touch Stop .

• If three devices are already paired, Memory Full is displayed and pairing cannot be

performed. In such cases, delete a paired device first. Refer to this page.

• If no device can be found, Not Found is displayed. In such cases, check the status

of the Bluetooth device and search again.

Starting to search.

Switching between the device names and Bluetooth device addresses.

5. Touch a device name to select the device you want to connect to.

While connecting, Pairing is displayed. If the connection is established, Paired is

displayed.

• If your device support SSP (Secure Simple Pairing), six-digit number appears on the

display of this unit. Once the connection is established, this number disappears.

• If the connection fails, Error is displayed. In such cases, try again from the

beginning.

• The PIN code is set to 0000 as the default, but can be changed. Refer to “Entering

PIN code for Bluetooth wireless connection” on page 50.

• Once the connection is established, the device name is displayed.

Touch the device name to disconnect.

• If you want to delete a paired Bluetooth telephone, display Delete OK?. Touch Yes

to delete the device.

• Never turn the unit off while the paired Bluetooth telephone is being deleted.

Connecting to a Bluetooth device automatically

If this function is set to on, a connection between your Bluetooth device and this unit

will take place automatically as soon as the two devices are less than a few meters

apart.

Initially, this function is set to on.

1. Press the home button to switch to the home display.

2. Touch the Bluetooth key to open the Bluetooth connection menu.

3. Touch Auto Connect to turn automatic connection on.

If your Bluetooth device is ready for a Bluetooth wireless connection, a connection to

this unit will automatically be established.

• To turn automatic connection off, touch Auto Connect again.

If connection fails, “Auto connection failed. Retry?” appears. Touch Yes to

reconnect.

4. Once you turn your vehicle’s ACC switch on again, a connection is established

automatically.

Deleting a paired device.

13-MAN-AVH7500-GB.fm Page 49 Thursday, February 28, 2013 10:20 AM

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 69 70

Commentaires sur ces manuels

Pas de commentaire

Pioneer AVH-X7500BT Manuel d'utilisateur Page 49

Commentaires sur ces manuels

Produits connexes et manuels pour Multimédia automobile Pioneer AVH-X7500BT