Pioneer PDP-4270XD Manuel d'utilisateur télécharger pdf (Page 43)

Using the Electronic Programme Guide (EPG) 10

English

• For priorities about overlapping presets, see Priority rules for

overlapping presets below.

• The TIMER indicator on the front of the plasma television lights up

in orange when a programme is preset for recording/watching.

• Recording may fail because of watching restrictions imposed by

the smart card.

Setting the timer manually

Using the menu, you can also preset digital TV programmes by

specifying their scheduled date and time.

1 Press HOME MENU.

2 Select “Setup“ (/ then ENTER).

3 Select “DTV Setup“ (/ then ENTER).

4 Select “Programme Timer“ (/ then ENTER).

The schedule table appears.

5 Select a programme number (/ then ).

You can select any desired programme number.

6 Specify a date (/ or 0 to 9, then ).

7 Specify the start hour/minute and end hour/minute (/

or 0 to 9, then ).

8 Specify a channel number (/ or 0 to 9, then ).

9 Register the preset settings after all items are set (ENTER).

• If a preset time is in the past or the channel is locked, an alert

message appears.

• A yellow triangle icon indicates that the recording/watching may

fail due to overlapping presets.

• If presetting another programme, repeat steps 5 to 9.

• You can preset up to 10 programmes.

10 Press HOME MENU to exit the menu.

Note

• Preset recording/watching begins immediately when presetting

operations are performed within three minutes of the start of the

programme.

• Presets made using the EPG are automatically shown in the

scheduled table.

• Recording may fail because of watching restrictions imposed by

the CA module.

Priority rules for overlapping presets

When preset TV programmes are overlapped, the following two rules

are used to determine higher priority. If both rules are met, the rules

are applied in the order 1 then 2.

Rule 1: If two presets overlap, the preset with the earlier start time

is given a higher priority. If two presets are sequential, the last

portion of the first programme or the first portion of the second

may not be recorded.

Rule 2: If presets with the same start time overlap, the preset with

the higher list number is given priority.

Changing/cancelling TV programme presets

Using the EPG

Use the following procedure to change or cancel programme presets

using the EPG.

1 Press EPG.

The EPG screen appears.

2 Select the desired preset programme (/// then ENTER

or GREEN).

A dialogue box appears.

• If you select "Yes", go to step 3.

• To quit the operation, select "No".

3 Select the preset programme ( or ENTER).

4 Select a programme number to edit (/).

• You can delete the preset programme by pressing the RED button.

5 Edit the selected preset programme and update the setting

(ENTER).

The screen alerts you if the preset programme being edited has

already started or finished.

6 When the setting is complete, press EPG to exit the EPG

screen.

Note

• When you want to stop recording/watching in progress that was

started by a programme presetting, for example, to change the

channel, an alert message appears indicating that the presetting

will be cancelled. In this case, you cannot cancel the programme

presetting using the EPG.

- - -. - -. - - -

01 - - -. - -. - - -

Programme Timer

Date

- - : - - - - - : - -

Time

- - - - - - - - - - - - - - - - - - - - - - - -

Channel Info

Wed.24.Nov 12:34

- - -. - -. - - -

01 Mon.05.Jan

Programme Timer

Date

- - : - - - - - : - -

12:00-13:00

Time

- - - - - - - - - - - - - - - - - - - - - - - -

001

************

Channel Info

Wed.24.Nov 12:34

PDP4270XD_En.book Page 43 Friday, June 16, 2006 5:32 PM

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 175 176

Pioneer PDP-4270XD Manuel d'utilisateur Page 43

Commentaires sur ces manuels

Pioneer PDP-4270XD Manuel d'utilisateur Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Télévisions Pioneer PDP-4270XD