Pioneer Kuro PRO-101FD Manuel d'utilisateur télécharger pdf (Page 77)

Helpful Information

7.3 Troubleshooting & Service Information

General

Issue Possible Solutions

No power • Check the connection seating at the wall and panel.

• See if the panel’s main power switch is turned ON.

• Confirm that the remote is set to MONITOR.

If the panel indicator lights red, press

MONITOR

(a)

on the remote control or the

STANDBY/ON

button on the flat panel display.

Power suddenly turns off • Check the power control setting.

• See if the panel’s internal temperature has increased.

Clean the vents or remove any blocking objects.

Panel does not operate • External influences such as voltage malfunction, static electricity, etc., may cause

improper operation.

Unplug the panel from the wall and leave it for two or more minutes. Reconnect and

attempt to operate the panel once again.

Remote control does not

operate

• Check if display power is off. Press the button when the Power On and STANDBY

indicators are off.

• Confirm that the mode is set to MONITOR.

• Examine the remote control sensor on the panel for obstructions that could block the

signal.

• Check that the remote’s batteries are installed properly and hold a change.

Replace with new batteries to verify.

• Consider changes in lighting such as stronger or new light sources that may wash out

the signal.

Picture

Issue Possible Solutions

No picture • Check the picture adjustment settings.

Reset to default values if necessary.

• Confirm that the connected equipment is installed and programmed properly.

• If viewing an image from a PC, confirm that the signal is compatible.

Screen appears dark • Check for any obstacles in front of the Room Light Sensor.

Odd coloring and shades

or misaligned images

• Review the room lighting for recent changes or different natural lighting sources from

windows or doorways.

• Check the picture tone, adjust as necessary.

Picture is cut off or runs

off screen

• Check the screen size for the current input source.

• Confirm that the position of the picture is centered.

Brightness and color

tone on the sides differ

from the center

• If images in 4:3 mode or letterbox images are displayed for long periods or for shorter

periods over several days, an after-image may remain due to burning.

Watch images in Full screen as much as possible to avoid this issue.

• Change the Brightness Sync. setting to Auto.

This function adjusts the brightness of the gray side masks for the brightness of the main

image.

• Use the Long Life Settings function (see “4.2.1 Extend Your Panel Life”)

PRO-141FD_PRO-101FD.book Page 77 Monday, May 12, 2008 3:27 PM

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 105 106

Commentaires sur ces manuels

Pas de commentaire

Pioneer Kuro PRO-101FD Manuel d'utilisateur Page 77

Commentaires sur ces manuels

Produits connexes et manuels pour Les téléviseurs à plasma Pioneer Kuro PRO-101FD