Pioneer Kuro PRO-101FD Manuel d'utilisateur Page 78
- Page / 106
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
78
En
07
Helpful Information
Picture does not appear
properly
• Check the setting for Color Decoding when using INPUT 2 or INPUT 3 (pages 52 and 53).
• Check the setting for Signal Type.
• Check the setting for Video when using INPUT 4 through INPUT 8 (page 54).
• Check the setting for Signal Format when using INPUT 3 through INPUT 8 (page 54).
After-image lag • If a bright or still image was on screen for a long period before switching to a darker
image, the original image may appear as an after-image or ghost. Try playing another
bright image, switching the picture quickly many times, or show a very active scene.
• Use the Long Life Settings function (see “4.2.1 Extend Your Panel Life”)
• Display the Video Pattern screen to help reduce after-image lag.
KURO LINK
Issue Possible Solutions
KURO LINK does not
function
• Check the connections between the panel and the HDMI equipment.
• Confirm that the settings for the panel are correct.
• Confirm that the equipment is HDMI compliant.
• Confirm that settings for the equipment are correct.
For details, refer to the operating instructions that came with the equipment.
Error message:
“The
device cannot be
operated. Please check
connection”
• Check the connections between the panel and the HDMI equipment.
• Confirm that settings for the equipment are correct.
For details, refer to the operating instructions that came with the equipment.
No picture • Check the connections between the panel and the HDMI equipment.
• Confirm that settings for the equipment are correct.
For details, refer to the operating instructions that came with the equipment.
Panel sounds/noises • Some sounds are appropriate for plasma technology.
Examples: fan motor noise, electrical circuit humming, glass panel buzzing, etc.
Brightness on sides of
screen are uneven
• Display content that completely fills the screen until unevenness is minimized.
• Change the AV mode setting.
IP Control
Issue Possible Solutions
Web browser screen
does not open after
entering the correct IP
Address
• Confirm that the indicator turns on after setting the LED option to On.
• Check the cable connection if the indicator does not light.
• Confirm that the other end of the cable is properly connected to the PC, hub or router if
the indicator does not light.
The indicator lights but
the web browser screen
does not open
• Confirm that the other end of the cable is not connected to any other device than
Ethernet (such as a telephone).
• When using a DHCP, confirm that the IP Address allocated by the server has not
changed (the address may change as a DHCP server reallocates the addresses
periodically).
Entering an IP Address
fails even after activating
the DHCP function
• Confirm that the DHCP server is activated within the network.
Picture
Issue Possible Solutions
PRO-141FD_PRO-101FD.book Page 78 Monday, May 12, 2008 3:27 PM
- PIONEER CORPORATION 1
- IMPORTANT 2
- TABLE OF CONTENTS 3
- Specifications Sheet 6
- Rear view (PRO-141FD) 12
- Rear view (PRO-101FD) 12
- • Consult your dealer 13
- (PRO-141FD) 15
- (commercially available) 17
- PRO-141FD 19
- PRO-101FD 19
- Cable clamp 20
- 3 Basic Operations 21
- Basic Operations 22
- 4 Basic Picture Adjustment 25
- Basic Picture Adjustment 26
- Selection 31
- 5.1.3 Choose a PC Source 32
- (AV source) 35
- Contrast 36
- 5.3.7 Use CTI and Color Space 40
- 5.3.10 Adjust Color Signals 42
- 5.4 View in Multi-Screen 43
- 5.5 Freeze the Picture 44
- 5.6 Manage the Power 45
- EDIT/LEARN 46
- CH ENTER 49
- 6.2.2 Apply Settings for a PC 53
- 6.3 Use HDMI Inputs 54
- Video (over-scan) 55
- PC (under-scan) 55
- KURO LINK 57
- Note: Pressing 57
- Setting 58
- Control Setup 58
- Input Setting 58
- 6.4.2 Control a Recorder 59
- 6.4.3 Control a Player 59
- Rear view 60
- 6.7 Use the IR REPEATER OUT 62
- 6.8 Connect to a Network 63
- 6.8.1 IP Control Setting 64
- Network 65
- TOP : Virtual Remote 66
- Terminal 67
- Functions 67
- Web control system 68
- 6.9 Assign a Serial Number 69
- 6.9.2 Assign a Baud Rate 70
- INTEGRATOR MENU 71
- 7 Helpful Information 75
- Helpful Information 76
- 8 Cautions and Warnings 80
- Cautions and Warnings 81
- 9 Appendix 85
- Appendix 100
Produits connexes et manuels pour Les téléviseurs à plasma Pioneer Kuro PRO-101FD
(266 pages)
(60 pages)
(195 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.894 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels