Pioneer Kuro PRO-101FD Manuel d'utilisateur Page 47
- Page / 106
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
47
En
Use Other Equipment With Your Flat Panel Display
06
To delete a learned code, overwrite it with a new code on the same button or follow the directions below.
1 ) Simultaneously press the EDIT/LEARN and 2 buttons to begin.
The selected mode indicator flashes when the remote control is ready to be programmed.
2 ) Press and hold MONITOR a for at least two seconds.
The remote control starts deleting all learned codes for selected modes. When completed, the mode
indicator blinks Off and the remote control returns to normal operation.
6.1.2 Assign a Manufacturing Code to the Remote Control
To assign a preset Manufacturing code to the panel’s remote control,
follow the directions below (Manufacturing codes are listed in section
“9.1 Manufacturer Codes to Program into the Remote Control”).
1 ) Press SELECT to choose the device to program.
2 ) Simultaneously press the EDIT and 1 buttons to begin.
The selected mode indicator flashes when the remote control is
ready to be programmed.
3 ) Use the number buttons to enter a manufacturer code.
When the indicator turns off, the code has been stored in the
remote control.
Factory default manufacture codes:
STB (Set-top Box): Pioneer (0329)
BDP/LD/DVD/DVR: Pioneer (2052)
VCR (VTR): Pioneer (0058)
6.1.3 Issue a Library Search for a Manufacturer Code
If the code for a particular device is unknown, cycle through the available
codes for a similar unit then sample some functions for that code.
To find a code that can control the unit, follow the steps below using
different codes to find the best match.
1 ) Press SELECT to choose the device to program.
2 ) Simultaneously press the EDIT and 3 buttons to begin.
The selected mode indicator flashes when the remote control is
ready to search the code library.
3 ) Sample a code using a SOURCE POWER, PLAY, 1 or CH+
command.
4 ) Use the up/down arrow (/) buttons to advance to the next code
if the sampled code fails to control the device.
Another option is to return to the previous code and repeat Step 3.
5 ) Press ENTER to lock in the code that properly operates the device.
All the available buttons for the selected mode are added when the
mode indicator flashes on for one second. The remote control then
returns to normal operation.
EDIT/LEARN
VCRSTBMONITOR
BDP
LD
DVD
DVR
CBL
SAT
SELECT
INPUT
SUB PIP
1 234
8765
MENU
EXIT
USER MENU
RETURN
ON DEMAND
SOURCE
DVD/HDD
VOL
RECEIVER
EDIT/LEARN
VCRSTBMONITOR
BDP
LD
DVD
DVR
CBL
SAT
SELECT
FAVORITE
INPUT
TOOLS
TOP MENU
GUIDE
HOME
MENU
ENTER
SUB PIP
123 4
8765
PRO-141FD_PRO-101FD.book Page 47 Monday, May 12, 2008 3:27 PM
- PIONEER CORPORATION 1
- IMPORTANT 2
- TABLE OF CONTENTS 3
- Specifications Sheet 6
- Rear view (PRO-141FD) 12
- Rear view (PRO-101FD) 12
- • Consult your dealer 13
- (PRO-141FD) 15
- (commercially available) 17
- PRO-141FD 19
- PRO-101FD 19
- Cable clamp 20
- 3 Basic Operations 21
- Basic Operations 22
- 4 Basic Picture Adjustment 25
- Basic Picture Adjustment 26
- Selection 31
- 5.1.3 Choose a PC Source 32
- (AV source) 35
- Contrast 36
- 5.3.7 Use CTI and Color Space 40
- 5.3.10 Adjust Color Signals 42
- 5.4 View in Multi-Screen 43
- 5.5 Freeze the Picture 44
- 5.6 Manage the Power 45
- EDIT/LEARN 46
- CH ENTER 49
- 6.2.2 Apply Settings for a PC 53
- 6.3 Use HDMI Inputs 54
- Video (over-scan) 55
- PC (under-scan) 55
- KURO LINK 57
- Note: Pressing 57
- Setting 58
- Control Setup 58
- Input Setting 58
- 6.4.2 Control a Recorder 59
- 6.4.3 Control a Player 59
- Rear view 60
- 6.7 Use the IR REPEATER OUT 62
- 6.8 Connect to a Network 63
- 6.8.1 IP Control Setting 64
- Network 65
- TOP : Virtual Remote 66
- Terminal 67
- Functions 67
- Web control system 68
- 6.9 Assign a Serial Number 69
- 6.9.2 Assign a Baud Rate 70
- INTEGRATOR MENU 71
- 7 Helpful Information 75
- Helpful Information 76
- 8 Cautions and Warnings 80
- Cautions and Warnings 81
- 9 Appendix 85
- Appendix 100
Produits connexes et manuels pour Les téléviseurs à plasma Pioneer Kuro PRO-101FD
(266 pages)
(60 pages)
(195 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.188 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels