Pioneer AVIC 8 DVD II Manuel télécharger pdf (Page 12)

Setting Switch 3

Setting Switch 3 ON/OFF determines which DVD code from A to C is transmitted from the

Remote Control. Depending on the combination with a Pioneer DVD player, you need to

change the position of the switch. (If you use units with the same code, when you press a

remote control button all these units will respond, making operation troublesome.) See the

corresponding section from Setting A to Setting D set in “Setting Switch 1 and 2” described

above.

Setting A

Switch 3 is not to be used (It does not matter whether it is ON or OFF.)

When the Operation Mode switch is set to “AUDIO”, you can operate units that receive A

code signals.

When the Operation Mode switch is set to “DVD”, you can operate units that receive B code

signals.

Setting B

Setting C and D

Setting Switch 4

When the Operation Mode switch is set to “NAVI”, set using VOL dial depending on the

equipment you want to adjust.

➲ Please set the switches correctly according to the combination of your equipment. Please

make sure that the setting is correct, otherwise the Navigation System will not work prop-

erly.

Units receiving A code signals : XDV-P9 (XDV-P9—)

Units receiving B code signals : AVIC-9DVD, AVIC-9DVD

—

Units receiving C (DVH code) code signals : DVH-P7000R

Units that can be set to receive both A and B codes : AVX-P7300DVD, SDV-P7

ON : When the Operation Mode switch is set to “AUDIO”, you can operate units that

receive A code signals.

When the Operation Mode switch is set to “DVD”, you can operate units that receive

B code signals.

OFF : When the Operation Mode switch is set to “AUDIO”, you can operate units that

receive C code signals.

When the Operation Mode switch is set to “DVD”, you can operate units that receive

B code signals.

ON : You can operate units that receive A code signals.

OFF : You can operate units that receive B code signals.

When the Operation Mode switch is set to “AUDIO”, only the operation with the

NEXT/PREV control, control stick, and the PLAY/PAUSE button is possible.

When the Operation Mode switch is set to “DVD”, you can perform all DVD opera-

tions.

ON : Volume of the voice guidance of Navigation system is adjusted.

OFF : Volume of Pioneer Head Unit (including Pioneer AV master unit) is adjusted.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

Pas de commentaire

Pioneer AVIC 8 DVD II Manuel Page 12