Pioneer AVIC-X1BT Manuel d'utilisateur télécharger pdf (Page 10)

9

Connecting the System

Connecting the power cord (1)

Connect leads of the same

colour to each other.

Cap (*1

When not using this terminal,

do not remove the cap.

Fuse (10 A)

Yellow

To terminal always supplied

with power regardless of

ignition switch position.

Black (earth)

To vehicle (metal) body.

Bluetooth

adapter

(CD-BT10)

Note:

Depending on the kind of vehicle, the

function of *3 and *5 may be different.

In this case, be sure to connect *2 to *5

and *4 to *3.

Fuse (2 A)

)

ISO connector

Yellow (*2)

To terminal always supplied

with power regardless of

ignition switch position.

Red (*4)

To electric terminal controlled

by ignition switch (12 V DC)

ON/OFF.

Yellow (*3)

Back-up

(or accessory)

Red (*5)

Accessory

(or back-up)

Black (earth)

To vehicle (metal) body.

Orange/white

To lighting switch terminal.

Note:

In some vehicles, the ISO connector

may be divided into two. In this case,

be sure to connect to both connectors.

Fuse resistor

Fuse resistor

Speaker leads

White: Front left +

White/black: Front left ≠

Grey: Front right +

Grey/black: Front right ≠

Green: Rear left + or Subwoofer +

Green/black: Rear left ≠ or Subwoofer ≠

Violet: Rear right + or Subwoofer +

Violet/black: Rear right ≠ or Subwoofer ≠

*1

*2

*4

*3

*5

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 193 194

Commentaires sur ces manuels

Pas de commentaire