Pioneer X-HM82D Manuel d'utilisateur télécharger pdf (Page 46)

Playback with NETWORK features

Note

•

If your router does not have a built-in DHCP server function,

you have to set up the network manually.

 Select DHCP to be Off and press ENTER in step 7. If your

router does not have a built-in DHCP server function, you

have to set up the network manually.  Select DHCP to be

Off and press ENTER in step 4. on page 42

•

When you connect this receiver to the Internet via a proxy

server, proxy server settings are required.

 Select Use Proxy Server and press ENTER in step 7.

Then Enter Proxy Host Name and the port number of

your proxy server in the Proxy Port field.

F: Connecting to a router without WPS-PBC

function

This section describes how to set the network connection

using Web browser on a computer.

Be sure your computer is equipped with wireless LAN

function. Settings can be performed from the Web browser of

the computer.

Be sure the LAN cable is not connected to the receiver.

Plug the power cord into an AC outlet. Press STANDBY/

ON.

Press NET SERVICE



SETUP on the remote control.

Select Network Setting



Network Configuration



Wireless



Web Control.

Select Start



OK.

The receiver restarts. Change settings on Web Control on

your computer.

Select Pioneer Setup (this receiver) in the available

wireless network connection of your computer.

SSID is displayed as Pioneer Setup:xxxxxx. “xxxxxx” is the

lower three bytes of the MAC address.

Note

•

Consult the appropriate operating instructions for

information regarding operation of the computer, iPhone,

tablet computer or other device used.

•

Since this kind of connection is not encoded, a minor

security risk may be involved.

•

This setting for the network has been confirmed for Mac OS

X 10.7 and Safari 5.1.

Start your computer's Web browser, and access the URL

noted below to make settings for this unit.

The Web Control menu will appear.

For Safari

Press Bookmark icon ( ) at the upper left of the

screen. Click Bonjour list (a), and then select this unit’s

name (“Friendly Name”) (b) in Bookmark.

Note

•

The displayed name will change depending on the product

being used.

XC-HM72 *****, XC-HM82 *****, XC-HM72D ***** or XC-

HM82D ***** will be displayed. (“*****” is the lower three

bytes of the MAC address.)

Click Network Setup



Network Configuration. Select

Auto and then press OK.

Setup the network settings manually and then press

Apply.

If SSID is not displayed, return to step 9 and select

Manual.

The receiver restarts and the new network settings are applied

to the receiver.

Note

•

You can set the network as in the above by connecting this

unit’s IP address via the Web Browser even if Web Control

isn’t selected.

000001

000002

000003

XX.XX

:xxxxxx

http://192.168.1.1

192.168.1.1

XC-HM82

*****

XC-HM82

*****

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 61 62

Commentaires sur ces manuels

Pas de commentaire

Pioneer X-HM82D Manuel d'utilisateur Page 46

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs de médias en voiture Pioneer X-HM82D