Pioneer F40 Manuel d'opérations télécharger pdf (Page 153)

! Phone Ringtone

This setting controls the incoming ring tone

volume.

! Phone Voice

This setting controls the incoming voice vo-

lume.

p “Phone Ringtone” and “Phone Voice” ad-

justments are needed only when the mobile

phone featuring Bluetooth technology is

connected.

p Volume of the AV source is adjusted by the

VOL (+/–) button or Multi-control.

= For details, refer to Checking part names

and functions on page 12.

# If you touch the key next to “Beep”, the setting

is changed.

! On (default):

A beep sounds.

! Off:

The beep sound is muted.

# If you touch the key next to “VR Beep”, the set-

ting is changed.

p This function is available for AVIC -F40BT

only.

Each time you touch the key changes the setting.

! On (default):

Voice recognition beep is enabled.

! Off:

Voice recognition beep is disabled.

4 To finish the setting, touch [OK].

Changing the preinstalled

splash screen

You can change the splash screen to the other

images preinstalled in the navigation system.

1 Display the “System Settings” screen.

= For details, refer to Displaying the screen for

system settings on page 149.

2 Touch [Splash Screen].

The “Select Splash Screen” screen appears.

3 Touch the image to use as the splash

screen from the list.

The image is displayed on the screen.

4 Touch [OK].

The image is set as the splash screen, and the

“System Settings” screen returns.

Changing to the splash screen

stored in the SD memory card

You can change the splash screen to other

images stored in the SD memory card. Copy

your chosen image to the SD memory card,

and select the image to import.

p Splash screen images should be used with-

in the following formats;

! BMP or JPEG files

! Allowable horizontal and vertical size

are 2 592 pixels x 1 944 pixels or smaller

! Allowable data size is 6 MB or smaller

p Proper compatibility with allowable files is

not guaranteed.

p Imported original images will be stored in

the built-in memory, but the ability to save

these images cannot be guaranteed com-

pletely. If your original image data is de-

leted, insert the SD memory card again

and re-import the original image.

p The maximum number of images, includ-

ing the images in the built-in memory, that

can be imported and displayed on the list is

200.

1 Create a folder named “Pictures” on the

top-most directory of the SD memory card.

2 Store the picture files in the “Pictures”

folder.

3 Insert an SD memory card into the SD

card slot.

= For details of the operation, refer to Insert-

ing and ejecting an SD memory card on

page 16.

4 Display the “System Settings” screen.

= For details, refer to Displaying the screen for

system settings on page 149.

5 Touch [Splash Screen].

The “Select Splash Screen” screen appears.

Engb

153

Chapter

27

Customising preferences

Customising preferences

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 219 220

Commentaires sur ces manuels

Pas de commentaire