Pioneer VSX-430 Manuel d'utilisateur télécharger pdf (Page 34)

Additional information

 In order to operate TUNER and USB functions, first press the

TUNER or USB button before operating.

 The display is dark.

 Press

DIMMER

on the remote control repeatedly to return to

the default.

 During ECO mode, the brightness switches between 2

levels. If the dimmest level is selected, DIMMER will be

shown on the display. (Mode other than ECO: 3 levels,

ECO mode: 2 levels)

 Display flashes and cannot be operated.

 Depending on the input signal or listening mode, there may be

functions that cannot be selected.

 The Bluetooth wireless technology device cannot be

connected or operated. Sound from the Bluetooth

wireless technology device is not emitted or the sound is

interrupted.

 Check that no object that emits electromagnetic waves in the

2.4 GHz band (microwave oven, wireless LAN device or

Bluetooth wireless technology apparatus) is near the receiver.

If such an object is near the receiver, set the receiver far from

it. Or, stop using the object emitting the electromagnetic

waves.

 Check that the Bluetooth wireless technology device is not too

far from the receiver and that obstructions are not set between

the Bluetooth wireless technology device and the receiver. Set

the Bluetooth wireless technology device and the receiver so

that the distance between them is less than about 10 m* and

no obstructions exist between them.

* The line-of-sight transmission distance is an estimate. Actual

transmission distances supported may differ depending on

surrounding conditions.

 The Bluetooth wireless technology device may not be set to the

communication mode supporting the Bluetooth wireless

technology. Check the setting of the Bluetooth wireless

technology device.

 Check that pairing is correct. The pairing setting was deleted

from this receiver or the Bluetooth wireless technology device.

Reset the pairing.

 Check that the profile is correct. Use a Bluetooth wireless

technology device that supports A2DP profile.

HDMI

 No picture or sound.

 If the problem still persists when connecting your HDMI

component directly to your monitor, please consult the

component or monitor manual or contact the manufacturer for

support.

 No picture.

 Video signals that are input from the analog video terminal will

not output from the HDMI terminal. Signals that are input from

the HDMI terminal will not output from the analog video

terminal. Be consistent with the type of cable between input

and output.

 Depending in the output settings of the source component, it

may be outputting a video format that can’t be displayed.

Change the output settings of the source, or connect using the

composite video jacks.

 This receiver is HDCP-compatible. Check that the components

you are connecting are also HDCP-compatible. If they are not,

please connect them using the composite video jacks.

 Depending on the connected source component, it’s possible

that it will not work with this receiver (even if it is HDCP-

compatible). In this case, connect using the composite video

jacks between source and receiver.

 If video images do not appear on your TV, try adjusting the

resolution, Deep Color or other setting for your component.

 To output signals in Deep Color, use an HDMI cable (High

Speed HDMI

®/

™ Cable) to connect this receiver to a

component or TV with the Deep Color feature.

 The OSD screen (Home Menu, etc.) isn’t displayed.

 The OSD will not appear if you have connected using the

composite output to your TV. Use HDMI connections when

setting up the system.

 No sound, or sound suddenly ceases.

 Check that the HDMI setting is set to AMP (page 27).

 If the component is a DVI device, use a separate connection for

the audio.

 HDMI format digital audio transmissions require a longer time

to be recognized. Due to this, interruption in the audio may

occur when switching between audio formats or beginning

playback.

 Turning on/off the device connected to this unit’s HDMI OUT

terminal during playback, or disconnecting/connecting the

HDMI cable during playback, may cause noise or interrupted

audio.

Important information regarding the HDMI

connection

There are cases where you may not be able to route HDMI

signals through this receiver (this depends on the HDMI

equipped component you are connecting-check with the

manufacturer for HDMI compatibility information).

If you aren’t receiving HDMI signals properly through this

receiver (from your component), please try the following

configuration when connecting up.

Configuration

Connect your HDMI-equipped component directly to the

display using an HDMI cable. Then use the most convenient

connection (digital is recommended) for sending audio to the

receiver. See the operating instructions for more on audio

connections. Set the display volume to minimum when using

this configuration.

Note

•

Depending on the component, audio output may be limited

to the number of channels available from the connected

display unit (for example audio output is reduced to 2

channels for a monitor with stereo audio limitations).

•

If you want to switch the input source, you’ll have to switch

functions on both the receiver and your display unit.

•

Since the sound is muted on the display when using the

HDMI connection, you must adjust the volume on the

display every time you switch input sources.

USB messages

 ‘USB Error 1 (I/U ERR1)’

 There is a problem with the signal path from the USB to the

receiver. Switch off the receiver and reconnect the USB to the

receiver.

 ‘USB Error 3 (I/U ERR3)’

 When there is no response from the USB. Switch off the

receiver and reconnect the USB to the receiver.

 ‘USB Error 4 (I/U ERR4)’

 The power requirements of the USB device are too high for this

receiver. Switch off the receiver and reconnect the USB to the

receiver.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-430 Manuel d'utilisateur Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer VSX-430