Pioneer VSX-430 Manuel d'utilisateur télécharger pdf (Page 18)

Chapter

Basic playback

Playing a source

Here are the basic instructions for playing a source (such as

a DVD disc) with your home theater system.

Switch on your system components and receiver.

Start by switching on the playback component (for

example a DVD player), your TV and subwoofer (if you

have one), then the receiver (press



RECEIVER

Switch the TV input to the input that connects this

receiver.

For example, if you connected this receiver to the VIDEO

jacks on your TV, make sure that the VIDEO input is now

selected.

Press input function buttons to select the input function

you want to play.

•

The input of the receiver will switch over, and you will

be able to operate other components using the remote

control. To operate the receiver, first press

on the remote control, then press the appropriate

button to operate.

•

The input source can also be selected by using

INPUT

SELECT

buttons on the remote control, or by

using the front panel

INPUT SELECTOR

dial. In this

case, the remote control won’t switch operational

modes.

If you selected the proper input source and there is still

no sound, select the audio input signal for playback (see

Selecting the audio input signal

below).

Press

AUTO/DIRECT

to select ‘AUTO SURROUND’ and

start playback of the source.

If you’re playing a Dolby Digital or DTS surround sound

DVD disc, with a digital audio connection, you should

hear surround sound. If you’re playing a stereo source or

if the connection is an analog audio connection, you will

only hear sound from the front left/right speakers in the

default listening mode.

It is possible to check on the front panel display whether

or not surround sound playback is being performed

properly.

If the display does not correspond to the input signal and

listening mode, check the connections and settings.

Note

•

You may need to check the digital audio output settings on

your DVD player or digital satellite receiver. It should be set

to output Dolby Digital, DTS and 88.2 kHz/96 kHz PCM (2

channel) audio, and if there is an MPEG audio option, set

this to convert the MPEG audio to PCM.

•

Depending on your DVD player or source discs, you may

only get digital 2 channel stereo and analog sound. In this

case, the receiver must be set to a multichannel listening

mode if you want multichannel surround sound.

Use

VOLUME +/–

to adjust the volume level.

Turn down the volume of your TV so that all sound is

coming from the speakers connected to this receiver.

Selecting the audio input signal

The audio input signal can be selected for each input source.

Once it is set, the audio input that was selected will be applied

whenever you select the input source using the input function

buttons.



Press

SIGNAL SEL

to select the audio input signal

corresponding to the source component.

Each press cycles through the following:

•

H – Selects an HDMI signal. H can be selected for BD,

DVD, SAT/CBL or GAME input. For other inputs, H

cannot be selected.

When the HDMI option in Setting the Audio options

on page 27 is set to THRU, the sound will be heard

through your TV, not from this receiver.

•

A – Selects the analog inputs.

•

C1/O1 – Selects the digital input. The coaxial 1 input is

selected for C1, and the optical 1 audio input is

selected for O1.

When H (HDMI) or C1/O1 (digital) is selected and the

selected audio input is not provided, A (analog) is

automatically selected.

Note

•

BD and GAME inputs are fixed to H (HDMI). It cannot be

changed.

•

For the TV input, only A (analog) or C1/O1 (digital) can be

selected. However, if the ARC at HDMI Setup is set to ON,

the input is fixed to H (HDMI) and cannot be changed.

•

When set to H (HDMI) or C1/O1 (digital), lights when a

Dolby Digital signal is input, and DTS lights when a DTS

signal is input.

•

When the H (HDMI) is selected, the A and DIGITAL

indicators are off (see page 7

•

When digital input (optical or coaxial) is selected, this

receiver can only play back Dolby Digital, PCM (32 kHz to

96 kHz) and DTS (including DTS 96 kHz/24 bit) digital signal

formats. The compatible signals via the HDMI terminals

are: Dolby Digital, DTS, SACD (DSD 2 ch only), PCM

(32 kHz to 192 kHz sampling frequencies), Dolby TrueHD,

Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio

and DVD Audio (including 192 kHz). With other digital

signal formats, set to A (analog).

•

You may get digital noise when a LD or CD player

compatible with DTS is playing an analog signal. To prevent

noise, make the proper digital connections (page 13

) and

set the signal input to C1/O1 (digital).

RECEIVER

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-430 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer VSX-430