Pioneer SX-N30DAB Manuel d'utilisateur télécharger pdf (Page 35)

Various settings

Signal:

The signal strength of the connected access

point will be displayed.

Status:

The status of the connected access point will be

displayed.

MAC Address:

View this unit’s MAC address.

DHCP:

Enable

(default setting)

Disable

IP Address:

View/set the IP address.

Subnet Mask:

View/set the subnet mask.

Gateway:

View/set the default gateway.

DNS Server:

View/set the DNS server address.

Proxy URL:

Set the proxy server address.

Proxy Port:

Set the proxy port number.

This only appears when Proxy URL has been set.

Friendly Name:

Change the name for this unit to a

simple one for display on the equipment connected by

network. Press the ENTER button and input 31 or less

characters.

For information on how to input characters, see

“Inputting characters” (

33).

AirPlay PW:

You can enter a password so that only the

entered user can use AirPlay. Press the ENTER button

and input 31 or less characters.

For information on how to input characters, see

“Inputting characters” (

33).

Network Check:

You can check the network connection.

Press the ENTER button when “Start” is displayed.

∫ 6. Bluetooth

Make the

Bluetooth

setting.

If it is not displayed, wait for a moment until the

network feature starts.

Bluetooth:

Select whether or not to use the

Bluetooth

function.

(default setting)

Off

Select “On” when making following

Bluetooth

settings.

Auto In Change:

The input of the unit will automatically

be switched to “BLUETOOTH” when connection is made

from a

Bluetooth

enabled device to the unit.

(default setting)

Off

If the input is not switched automatically, set to “Off”

and change the input manually.

Auto Reconnect:

This function automatically reconnects

to the

Bluetooth

enabled device connected last when you

change the input selector to “BLUETOOTH”.

(default setting)

Off

This may not work with some

Bluetooth

enabled

devices.

Pairing Info:

The information of the previous pairing

stored in this unit will be initialized. Pressing the ENTER

button when “Clear” is displayed initializes the pairing

information stored in this unit.

This function does not initialize the pairing information

on the

Bluetooth

enabled device. When pairing the unit

again with the device, be sure to clear the pairing

information on the

Bluetooth

enabled device in

advance. For information on how to clear the pairing

information, refer to the

Bluetooth

enabled device’s

instruction manual.

Device:

Displays the name of the

Bluetooth

enabled

device connected to the unit.

The name is not displayed when “Status” is “Ready” or

“Pairing”.

Status:

Displays the status of the

Bluetooth

enabled

device connected to the unit.

Ready

: Not paired

Pairing

: Pairing

Connected

: Successfully connected

∫ 7. Firmware Update

Make the firmware update setting.

If it is not displayed, wait for a moment until the

network feature starts.

Update Notice:

Availability of a firmware update will be

notified via network.

Enable

(default setting)

Disable

Version:

The current firmware version will be displayed.

Update via NET:

Press the ENTER button to select when

you want to update the firmware via network.

You will not be able to select this setting if you do not

have Internet access or there is nothing to update.

Update via USB:

Press the ENTER button to select

when you want to update the firmware via USB.

You will not be able to select this setting if a USB

storage device is not connected or there is nothing to

update in the USB storage device.

∫ 8. Lock

SetupParameter:

The Setup menu will be locked to

protect the settings.

Locked

Unlocked

(default setting)

SX-N30_mst.book 35 ページ２０１５年１１月２日　月曜日　午後１２時５５分

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Pioneer SX-N30DAB Manuel d'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer SX-N30DAB