Pioneer SX-N30DAB Manuel d'utilisateur télécharger pdf (Page 15)

Connections

Wi-Fi

connection

Set up the Wi-Fi connection with the access point (a

wireless LAN router, for example). Set with the remote

control while watching the display on the main unit.

1. Turn on the unit.

2. Press the SETUP button.

The setup menu appears on the display.

3. Use the direction ( / ) buttons to select “5. Network”

on the display and press the ENTER button.

If it is not displayed, wait for a moment until the

network feature starts.

4. Use the direction ( / ) buttons to select “Wi-Fi” on

the display, and then use the direction ( / ) buttons

to select “On”.

5. Use the direction ( / ) buttons to select “Wi-Fi

Setup”, and then press the ENTER button when “Start”

is displayed.

6. Use the direction ( / ) buttons to select the method

of Wi-Fi connection and press the ENTER button.

Scan Networks:

Use this unit to search for and

connect to a wireless LAN router or other access point.

Use iOS Device:

If you are using a device using iOS 7

or later, you can connect easily with Wi-Fi just by

sharing the iOS device’s Wi-Fi settings with this unit.

∫ If you selected “Scan Networks”

7. Use the direction ( / ) buttons to select the SSID of

the access point and press the ENTER button.

If you changed the initial setting of the access point

to skip password entry, step 8 is unnecessary.

If you changed the initial setting of the access point

to hide the SSID, see “When the access point is not

displayed”.

8. Press the direction ( / ) buttons to select an

authentication method from the following and press the

ENTER button.

Enter Password:

Enter the password of the access

point to establish connection.

Enter the password on the display.

For information on how to input characters, see

“Inputting characters” (

33) under “Various

settings”.

Push Button:

Use the automatic setting button of the

access point to establish connection.

Hold down the automatic setting button of the access

point for the necessary seconds, select “OK” on the

display and press the ENTER button.

PIN code:

Select this method when the automatic

setting button of the access point is beyond the reach.

The 8-digit PIN code is displayed. Register the

displayed PIN code to the access point, select “OK” on

the display and press the ENTER button. For how to

instruction manual.

Make the following preparations.

Write down the SSID and password (key) of the

access point if they are shown in the label of the main

body.

The unit supports Wi-Fi connection with 2.4 GHz

access point.

SETUP

STANDBY/

ENTER

RETURN

, , , ,

SSID

SX-N30_mst.book 15 ページ２０１５年１１月２日　月曜日　午後１２時５５分

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Pioneer SX-N30DAB Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer SX-N30DAB