PRV-LX1 RS-422A Command Protocol Manual March 2005 Version 3.02 TP #T502201 All Rights Reserved Table of Contents 1.0 FOREWORD...
PRV-LX1 RS-422A Protocol 24 31 Cue Up With Data Cues the PRV-LX1 to the indicated time code and pauses. DATA – 1 DATA – 2 DATA – 3 DATA – 4 10
PRV-LX1 RS-422A Protocol 7X 20 Status Data Return all or part of the following data that corresponds to the “61:20 Status Sense” command Data # M
PRV-LX1 RS-422A Protocol E2 51 21 Chapter Search (PRV-LX1 original command) The command searches to a recorded chapter number Values are 1-99 (0x0
PRV-LX1 RS-422A Protocol E3 51 72 Trimming Title Preset (PRV-LX1 original command) The command presets the trimming title number. Values are 1-255
PRV-LX1 RS-422A Protocol E2 51 9F Mode Data When the unit receives the ”E1:51:8F Mode Sense” command, the current status of the unit is reported a
PRV-LX1 RS-422A Protocol 7.0 Procedure for Issuing Command <Example 1> < Example 1> is an example of playing Title 2, from the scene10
PRV-LX1 RS-422A Protocol START20・02Rec61・20Status SenseR ec ?NENDE1・51・81Title N um ber SenseTitle = 3E3・51・11・02・00Title Search61・20Status SensePl
PRV-LX1 RS-422A Protocol 8.0 Product-Specific Notes 8.1 Recording Delay There is a short delay of approximately 29+/-2 frames between when the PRV-L
PRV-LX1 RS-422A Protocol 8.2 Playback Delay When the PRV-LX1 is issued a play command, it experiences up to a +2 frames delay in the execution of th
PRV-LX1 RS-422A Protocol 9.0 Appendix Command Matrix by System Version Commands 2.04/1.03 2.51/1.03 ≥ 3.00/1.04 00 11 Device Type X X X 20.00 Sto
PRV-LX1 RS-422A Protocol 7.0 PROCEDURE FOR ISSUING COMMAND...14 8.0 PRODUCT-SPECIFIC NOTES...
PRV-LX1 RS-422A Protocol Manual Pioneer Electronics (USA) Inc. Industrial Solutions Business (ISB) 2265 East 220th Street Long Beach, CA 90810
PRV-LX1 RS-422A Protocol 1.0 Foreword The PRV-LX1 can be controlled externally using RS-422A commands. Control is applied through the REMOTE IN and
PRV-LX1 RS-422A Protocol 2.0 Communication Signal The PRV-LX1 conforms to EIA RS-422A and includes a full duplex communication channel. The transfe
PRV-LX1 RS-422A Protocol 4.0 Command Block Format The controlling device and the PRV-LX1 communicate through the interchange of command blocks. The
PRV-LX1 RS-422A Protocol The controller must ensure that no more than a 10 msec lapse occurs between bytes in a command block. The controller must
PRV-LX1 RS-422A Protocol 5.0 Command Table Code Command Response 00 11 Device Type Request 12 11 xx xx Device Type 20 00 Stop 10.01 ACK 20 0
PRV-LX1 RS-422A Protocol 6.0 Command Formats 00 11 Device Type Request PRV-LX1 Responds with a 12 11 Device Type Message containing 2 bytes of d
PRV-LX1 RS-422A Protocol 20 20 Rewind During playback or Time Shift PLAY, this command executes 192x speed Scan Reverse then pauses playback at t
Commentaires sur ces manuels