Pioneer DVR-231-AV Manuel d'utilisateur Page 22

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 68
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 21
Getting started
04
22
En
Making your first recording
This quick guide shows you how to make a basic
recording of a TV program to a recordable DVD.
Recording is covered in much more detail in chapter 6
(
Recording
).
1 If they aren’t already on, switch on your TV and
this recorder.
Press
STANDBY/ON
to switch on.
Make sure that the video input on your TV is set to this
recorder.
2 Press
OPEN/CLOSE (front panel only) to open
the disc tray.
3 Load a blank DVD-R or DVD-RW disc with the
label side face-up, using the disc tray guide to align
the disc.
When you load a new, blank DVD-RW disc, the
recorder will take a moment to initialize it for
recording.
4 Use the CH +/– buttons to select the TV channel
you want to record from.
You can also use the
+/–
buttons on the front panel if
the recorder is stopped.
Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.
5 Press
REC to start recording.
By default, the recording will be in
SP
(standard play)
mode, which will give you around two hours of
recording from a blank DVD disc. The different
recording mode and their recommended uses are
covered in mode detail in Chapter 6.
You can pause recording by pressing
.
Press
REC
or
again to restart recording.
6 When you want to stop recording, press
.
Playing back your recording
The TV program you just recorded should be on the DVD
disc as a single title with one or more chapters.
Press
to start playback.
If you want to stop playback before the end of the
recording, press
.
Using the built-in TV tuner
Changing TV channels
There are three different ways to select TV channels. Note
that you can’t change the TV channel during playback,
recording or during recording standby.
CH +/–
buttons on the remote
Number buttons
on the remote – For example, to
select channel 4, press
4
then
ENTER
; for channel 34,
press
3
,
4
,
ENTER
; for channel 102, press
1
,
0
,
2
,
ENTER
. (If you don’t press
ENTER
, the channel
changes after a few seconds.)
+/–
buttons on the front panel
DVD RECORDER
REC
STANDBY/ON
CH+
CH–
123
456
7890
ENTER
CH+
CH–
DVR-230_KU.book Page 22 Thursday, January 27, 2005 2:42 PM
Vue de la page 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

Commentaires sur ces manuels

Pas de commentaire