Pioneer DVD-V5000 RS-232C Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Lecteurs de DVD Pioneer DVD-V5000 RS-232C. Pioneer DVD-V5000 RS-232C User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 96
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
DVD-V5000
Industrial DVD Player
RS-232C
COMMAND PROTOCOL MANUAL
Manual Version 1.00
June 30, 2004
(Updated Dec 2005)
Pioneer Electronics (USA) Inc.
Business Solutions Division
Pioneer Corporation
Vue de la page 0
1 2 3 4 5 6 ... 95 96

Résumé du contenu

Page 1 - DVD-V5000

DVD-V5000 Industrial DVD Player RS-232C COMMAND PROTOCOL MANUAL Manual Version 1.00 June 30, 2004 (Updated Dec 2005) Pioneer Electronics (USA)

Page 2

DVD-V5000 DVD PlayerRS-232 Command Protocol 9-pin D-Sub connector Pin # Terminal Input/Output Function 1 NC 2 TxD Output send data 3 RxD Input

Page 3

DVD-V5000 DVD PlayerRS-232 Command Protocol Power ON mode more than 100 msec Power OFF Check the Key Lock condition. If the Key Lock mode is activ

Page 4 - Table of Contents

DVD-V5000 DVD PlayerRS-232 Command Protocol 3. SERIAL CONTROL 3.1 Serial Interface Specifications 3.1.1 Signal Interface The signal interface is a st

Page 5

DVD-V5000 DVD PlayerRS-232 Command Protocol 3.3 Command and Status During normal operation, when a computer transmits commands to a DVD-V5000, the p

Page 6

DVD-V5000 DVD PlayerRS-232 Command Protocol NOTE: The player ignores codes in the command string such as <SPACE> or <LF> (line feed) that

Page 7

DVD-V5000 DVD PlayerRS-232 Command Protocol 3.4 Error Messages If an error occurs during a command execution, the player returns an error code. The t

Page 8 - 1. INTRODUCTION

DVD-V5000 DVD PlayerRS-232 Command Protocol 4. COMMAND STRUCTURE The DVD-V5000 supports the commands listed below. COMMAND SUPPORTING FORMATS Name Mne

Page 9 - 2.1 Interface Connector

DVD-V5000 DVD PlayerRS-232 Command Protocol COMMAND SUPPORTING FORMATS Name Mnemonic DVD CD VCD P-Block Number Request ?A X X X Title/Track Numb

Page 10

DVD-V5000 DVD PlayerRS-232 Command Protocol 4.1 Command Mnemonic Each command is expressed as two (2) ASCII characters. There is no distinction betwee

Page 11

DVD-V5000 DVD PlayerRS-232 Command Protocol • Stack Data Upload [BU] • Stack Data Download [BD] • Memory Data Upload [MU] Once the <CR> term

Page 12 - 3. SERIAL CONTROL

This manual is copyrighted with all rights reserved. No part of this document may be reprinted, produced, translated or utilized in any form or by an

Page 13 - 3.3 Command and Status

DVD-V5000 DVD PlayerRS-232 Command Protocol If multiple commands are sent within the same String, the player returns a separate status value upon comp

Page 14 - RS-232 Command Protocol

DVD-V5000 DVD PlayerRS-232 Command Protocol 5. COMMAND DESCRIPTIONS 5.1 Open Function : Door Opens (Tray Ejects) Format : OP Explanation : If the c

Page 15 - 3.5 Initial Setting

DVD-V5000 DVD PlayerRS-232 Command Protocol rotating. Once the disc completely stops, the player enters Park mode and returns the completed status me

Page 16 - 4. COMMAND STRUCTURE

DVD-V5000 DVD PlayerRS-232 Command Protocol 5.5 Play Function : Pictures and sound are reproduced (Option - Auto Stop) Format : (Address)PL Explan

Page 17

DVD-V5000 DVD PlayerRS-232 Command Protocol The available address modes are listed below: Address Mode DVD CD VCD FR (Frame) X TM (Time) X

Page 18 - 4.1 Command Mnemonic

DVD-V5000 DVD PlayerRS-232 Command Protocol However, if the disc program does not allow a pause, the player ignores the command and returns an error m

Page 19 - 4.6 Request Status Return

DVD-V5000 DVD PlayerRS-232 Command Protocol scanning is finished, the player resumes the Random Access mode and returns the completed status message.

Page 20 - 4.7 Timing

DVD-V5000 DVD PlayerRS-232 Command Protocol NOTE: DVD offers only fixed speed reverse. VCD offers 1/2 to 1/16 speed forward only. Sometimes, depending

Page 21 - 5.3 Reject

DVD-V5000 DVD PlayerRS-232 Command Protocol Integer Speed Parameter Speed 60 46~90 1/1 30 23~45 ½ 15 12~22 ¼ 7 6~11 1/8 4 3~5 1/16 1

Page 22 - 5.4 Start

DVD-V5000 DVD PlayerRS-232 Command Protocol FR1200PL), when it is unnecessary to wait for the R status before sending additional commands. The ava

Page 23 - 5.5 Play

FCC INFORMATION The equipment described in this manual has been tested and found to comply with the limits for a Class B digital device in accordanc

Page 24 - 5.7 Still (DVD, VCD)

DVD-V5000 DVD PlayerRS-232 Command Protocol The available address modes are listed below: Address Mode DVD CD VCD FR (Frame) TM (Time) X X X CH (

Page 25

DVD-V5000 DVD PlayerRS-232 Command Protocol The Stop Marker is the same in functionality as the Play (or Multi-Speed) Auto Stop commands. The prima

Page 26

DVD-V5000 DVD PlayerRS-232 Command Protocol Explanation : This symbol can be used in place of a Time Code or a Frame number as a target address for th

Page 27 - 5.11 Speed (DVD, VCD)

DVD-V5000 DVD PlayerRS-232 Command Protocol 5.17 Frame (DVD) Function : Address specification flag is set to Frame Format : FR Explanation : Addre

Page 28 - 5.12 Search

DVD-V5000 DVD PlayerRS-232 Command Protocol (please refer to section 8.10 Serial Use Address Flag) Execution : String Status Return DVD player T

Page 29 - 5.13 Search & Play

DVD-V5000 DVD PlayerRS-232 Command Protocol 5.23 Index (CD) Function : Address flag is set to Index Format : IX Explanation : Address assignment pro

Page 30 - 5.14 Stop Marker

DVD-V5000 DVD PlayerRS-232 Command Protocol 5.26 Select Audio (DVD) Function : Select Audio Format : Integer AU Explanation : The command selects th

Page 31 - 5.15 Lead-Out Symbol

DVD-V5000 DVD PlayerRS-232 Command Protocol 5.29 Select Parental-Level (DVD) Function : Set Parental Level Format : Integer PT Explanation : The

Page 32 - 5.16 Clear

DVD-V5000 DVD PlayerRS-232 Command Protocol When playing DVD VR with bilingual audio, the output channel assignment for each integer (argument) is l

Page 33 - 5.18 Block Number (CD)

DVD-V5000 DVD PlayerRS-232 Command Protocol 5.32 Display Control Function : Character display is turned ON / OFF Format : Integer DS Explanation :

Page 34 - 5.21 Title (DVD)

Table of Contents 1. INTRODUCTION...1

Page 35 - 5.25 Select Subtitle (DVD)

DVD-V5000 DVD PlayerRS-232 Command Protocol VIDEO CONTROL VIDEO DEMODULATOR VIDEO OUT VIDEO SW DISPLAY CONTROL CHARACTER GEN

Page 36 - 5.28 Select Angle (DVD)

DVD-V5000 DVD PlayerRS-232 Command Protocol Argument Function 0 Unlock 1 Locks all keys include power 2 Locks only tray open Execution : Str

Page 37

DVD-V5000 DVD PlayerRS-232 Command Protocol 5.36 Stack Data Upload Function : Reads the data in the player: Command Stack data Format : BU Explana

Page 38 - 5.31 Video Control

DVD-V5000 DVD PlayerRS-232 Command Protocol (1) Fixed data: indicates the total data bytes of this transfer with HEX digits 2468H = 9320 (2) Fixed

Page 39 - 5.32 Display Control

DVD-V5000 DVD PlayerRS-232 Command Protocol Example: Segment Play Command : Title 02, from Frame 3600 to Frame 4800 > 4020036000048007 BP Dat

Page 40 - 5.33 Key Lock

DVD-V5000 DVD PlayerRS-232 Command Protocol Execution : String Status Return DVD player BU<CR> Park mode R<CR> 20e40010...026743<

Page 41 - 5.34 Stack Group Set (DVD)

DVD-V5000 DVD PlayerRS-232 Command Protocol 6. CURRENT PLAYER CONDITION REQUEST DESCRIPTIONS 6.1 P-Block Number Request Function : The command ret

Page 42 - 5.36 Stack Data Upload

DVD-V5000 DVD PlayerRS-232 Command Protocol Execution : String Status Return DVD player Play mode (CD) ?R<CR> 12<CR> Player plays T

Page 43

DVD-V5000 DVD PlayerRS-232 Command Protocol Execution : String Status Return DVD player Play mode ?T<CR> 03213<CR> 32 minutes, 13

Page 44

DVD-V5000 DVD PlayerRS-232 Command Protocol Execution : String Status Return DVD player ?F<CR> 0002047<CR> Play mode Frame 2047 ?F<CR

Page 45 - 5.37 Stack Data Download

5.11 Speed (DVD, VCD)...20 5.12 Search ...

Page 46 - 6.1 P-Block Number Request

DVD-V5000 DVD PlayerRS-232 Command Protocol Status information is returned in the following format: C1C2C3C4C5C6C7C8C9C10<CR> C1C2 first Trac

Page 47 - 6.4 Time Code Request

DVD-V5000 DVD PlayerRS-232 Command Protocol Status information is returned in the following format: C1C2C3C4C5<CR> C1 Disc Mount 0 = No 1

Page 48

DVD-V5000 DVD PlayerRS-232 Command Protocol 6.13 Register A Set Function : The current setting of Resister A is rewritten Format : Integer RA Expla

Page 49

DVD-V5000 DVD PlayerRS-232 Command Protocol The Display Control command turns the character display ON or OFF. The Register A Set command specifies

Page 50

DVD-V5000 DVD PlayerRS-232 Command Protocol The user’s area has lines numbered from 0 to 9 with a total of 10 lines available. If line 0 is designa

Page 51 - 6.12 CD Disc Status Request

DVD-V5000 DVD PlayerRS-232 Command Protocol 2. Enter the command character PR 3. Enter the terminate code <CR> 4. Specify the character strin

Page 52 - 6.13 Register A Set

DVD-V5000 DVD PlayerRS-232 Command Protocol 6.17 Advanced Setup Function : current setting of Advenced Setup Menu is rewritten Format : Integer MS

Page 53 - USER’S DISPLAY

DVD-V5000 DVD PlayerRS-232 Command Protocol 6.18 Communication Control Set Function : Selects the communication mode Format : Integer CM Explanatio

Page 54 - 6.15 Print Character

DVD-V5000 DVD PlayerRS-232 Command Protocol The following table provides fuller explanations for each Active mode: P00 (Open) Disc tray is open P01 (

Page 55 - 6.16 Clear Screen

DVD-V5000 DVD PlayerRS-232 Command Protocol Advenced Setup Menu on the screen. See the description of Advanced Setup (MS). NOTE: E04 is returned from

Page 56 - 6.17 Advanced Setup

6.14 Register D Set ...47 6.15 Print Characte

Page 57

DVD-V5000 DVD PlayerRS-232 Command Protocol Explanation : The player waits the input of number from the remote controller and returns the input number

Page 58 - 6.21 Advanced Setup Request

DVD-V5000 DVD PlayerRS-232 Command Protocol 6.27 Input Barcode Data Request Function : returns input data through a Barcode Reader Format : #B Expl

Page 59 - 6.24 Input Number Request

DVD-V5000 DVD PlayerRS-232 Command Protocol Explanation : The player returns the TxD termination setting from Register D Status information is re

Page 60 - 6.26 Input Unit Request

DVD-V5000 DVD PlayerRS-232 Command Protocol *: However, the command is held or incompletely executed. Execution : String Status Return DVD player

Page 61 - 6.29 Register D Request

DVD-V5000 DVD PlayerRS-232 Command Protocol If the command is valid for the situation, the player immediately returns “R<CR>”*. If there ar

Page 62 - 6.30 Menu Call (DVD)

DVD-V5000 DVD PlayerRS-232 Command Protocol Format : argument1, argument2 ET Explanation : The command emulates the “left” click of the mouse while

Page 63 - 6.32 Button Select (DVD)

DVD-V5000 DVD PlayerRS-232 Command Protocol Below is a list of the (SPRM) System Parameter. For more information, refer to "Table 4.6.1.2-1:Sys

Page 64 - 6.33 Enter Button (DVD)

DVD-V5000 DVD PlayerRS-232 Command Protocol 6.35 Memory Data Upload Function : reads the data from internal memory in a player Format : MU Explana

Page 65 - 6.34 Get Information (DVD)

DVD-V5000 DVD PlayerRS-232 Command Protocol Execution : String Status Return DVD player Park mode MU<CR> R<CR> …(11,134 bytes)…&

Page 66

DVD-V5000 DVD PlayerRS-232 Command Protocol 7. OPERATING MODES The Operating or Active mode consists of five sub-modes; Open, Park, Setup, Random Acce

Page 67 - 6.35 Memory Data Upload

8.11 Search Time/Frame ...65 8.12 Search Title/Track

Page 68

DVD-V5000 DVD PlayerRS-232 Command Protocol sfers. Refer to the previous figure for mode When the Reject command is sent to the player, video playbac

Page 69

DVD-V5000 DVD PlayerRS-232 Command Protocol 8. DVD-V5000 INTERNAL REGISTERS n pter number, Time Code, etc.), accompany comma isters. This Chapter d

Page 70 - .5 Reject 7

DVD-V5000 DVD PlayerRS-232 Command Protocol 8.8 e control. Buffer transmitted via the 8.10 erial Use Address Flag terface controls the player, a fl

Page 71

DVD-V5000 DVD PlayerRS-232 Command Protocol 8.15 Mark Title/Track (Mark Chapter) The register contains the Title/Track (mark Chapter) as a marker. T

Page 72

DVD-V5000 DVD PlayerRS-232 Command Protocol - 6710 ADDRESS MODE FLAG 1 CURRENT TIME/FRAME 2 P-TIME 3 CURRENT TITLE/TRACK CHAPTER 4 CURRENT INDEX 5 SE

Page 73

DVD-V5000 DVD PlayerRS-232 Command Protocol 9. EXTEND TERMINAL CONTROL h contact with an electrical ground (Pin 1). Check Ch ents. There re t W ti

Page 74 - REGISTER MODEL

DVD-V5000 DVD PlayerRS-232 Command Protocol 9.1 unc on A ignm nt Cr a C uit C trolle r a D e Ma x Circu refer low). Di Assi nment List (Standard s

Page 75 - 9. EXTEND TERMINAL CONTROL

DVD-V5000 DVD PlayerRS-232 Command Protocol 43 X X X 15 44 X 16 X X 45 X X 17 X 46 X X X 18 47

Page 76 - F ti ss e

DVD-V5000 DVD PlayerRS-232 Command Protocol 9.2 Function User Setting Function assignment for Numbers1 through 30 can be changed in Advanced Setup.

Page 77

DVD-V5000 DVD PlayerRS-232 Command Protocol DVD-V5000 DVD PlayerRS-232 Command Protocol - 72  RIGHT Button - 72

Page 78 - 9.2 Function User Setting

DVD-V5000 DVD PlayerRS-232 Command Protocol 1. INTRODUCTION This document defines the RS-232C command protocol for the Pioneer DVD-V5000 Industrial DV

Page 79

DVD-V5000 DVD PlayerRS-232 Command Protocol - 73  DOWN Button to select "MENU" ENTER button to change the function of switch 8 to MENU

Page 80

DVD-V5000 DVD PlayerRS-232 Command Protocol order to DISABLE the switch function, please select the switch and Press the mory area even efault Set

Page 81

DVD-V5000 DVD PlayerRS-232 Command Protocol 9.3 Controller Examples of Switch and Diode specifications are charted below. Switch Specifications On Re

Page 82 - 9.3 Controller

DVD-V5000 DVD PlayerRS-232 Command Protocol 9.2.2 Diode Matrix Circuit - 76

Page 83 - 9.2.2 Diode Matrix Circuit

DVD-V5000 DVD PlayerRS-232 Command Protocol . If a video has a picture stop code, when the player reaches the stop code point, it . If Prohibit Paus

Page 84 - 10. ADDITIONAL NOTES

Complete Command List by Name APPENDIX A - COMPLE AND LIST BY NAME NOTE: arg es commands with an argument or an a If arg or ards is ar eter is p

Page 85

Complete Command List by Name COMMAND SUPPORTING FORMATS Name Mnemonic DVD CD VCD Print Character arg PR x x x Register A Request $A x x

Page 86

Complete Command List by Mnemonic APPENDIX B - COMPLETE COMMAND LIST BY MNEMONIC NOTE: arg or ards (argument or address) prefaces commands with an a

Page 87

Complete Command List by Mnemonic COMMAND SUPPORTING FORMATS Mnemonic Name DVD CD VCD LO Lead Out Symbol x x x (adrs) MF Multi-Speed Forwar

Page 88

DVD Command List APPENDIX C - DVD COMMAND LIST NOTE: arg or ards (argument or ad commands with an argument or an address parameter. If arg or ards

Page 89

DVD-V5000 DVD PlayerRS-232 Command Protocol 2. INTERFACE 2.1 Interface Connector A computer may be connected to the DVD-V5000 using a 15-pin D-Sub con

Page 90

DVD Command List COMMAND Mnemonic Name Reject RJ Scan Forward NF Scan Reverse NR Scan Stop NS Search adrs SE Select Angle arg AG Select

Page 91 - DIX D - CD COMMAND

VCD Command List APPEN LIST N ent or r an address parameter. If arg or ards parameter is optional. COMMAND DIX D - CD COMMAND OTE: arg or ards (a

Page 92

VCD Command List Time Code Request ?T Title/Track Number Request ?R TOC Information Request ?Q Track TR Video Control arg VD - 85

Page 93

VCD Command List APPENDIX E - VCD COMMAND LIST NOTE: arg or ards (argument or address) prefaces commands with an argument or an a meter. If arg or a

Page 94

VCD Command List - 87 COMMAND Mnemo me nic NaSto rke ap Ma r drs SM Time TM Time Code Reque st ?T Title/Track Number Request ?R TOC Informat

Page 95 - APPENDIX F - ERROR CODES

Error Codes APPENDIX F - ERROR CODES Code Message Description E00 communication error Communication Line Error due to framing error or buffer over

Page 96

- 89DVD-V5000 Industrial DVD Player RS-232 Command Protocol Pioneer Electronic Corporation 4-1, Meguro 1-chome Meguro-ku, Tokyo 153 JAPAN http

Commentaires sur ces manuels

Pas de commentaire