Pioneer PRS-A700 Manuel d'utilisateur télécharger pdf (Page 7)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

Connection Diagram

Grommet

Special red battery wire [RD-223] (sold separately)

After making all other connections at the amplifier,

connect the battery wire terminal of the amplifier to

the positive (+) terminal of the battery.

Ground wire (Black) [RD-223] (sold separately)

Connect to metal body or chassis.

Car stereo with

RCA output jacks

System remote control wire (sold separately)

Connect the male terminal of this wire to the system remote control

terminal of the car stereo (SYSTEM REMOTE CONTROL). The female

terminal can be connected to the auto-antenna relay control terminal. If the

car stereo does not have a system remote control terminal, connect the

male terminal to the power terminal through the ignition switch.

Fuse (30 A)

Connecting wire with RCA pin

plugs (sold separately).

Connecting wire with RCA pin

plugs (sold separately).

Speaker output terminal

See the “Connecting the

Speakers and Input wires”

section for speaker connec-

tion instructions.

Fuse (20 A)

× 2

External Output

If only one input plug is used, do not

connect anything to RCA input jack B.

RCA input jack B

Front side

RCA input

jack A

Back side

Input Select Switch

For two-channel input, slide this switch

to the left. For four-channel input, slide

this switch to the right.

1 2 3 4 5 6 7 8 9 10 11 12 ... 73 74

Pas de commentaire

Pioneer PRS-A700 Manuel d'utilisateur Page 7