Pioneer AVIC900HVT Manuel d'utilisateur télécharger pdf (Page 18)

Installation

ENG/MASTER 96

DIN Front/Rear-mount

This unit can be properly installed either from “Front” (conventional DIN Front-mount) or

“Rear” (DIN Rear-mount installation, utilising threaded screw holes at the sides of unit

chassis). For details, refer to the following illustrated installation methods.

DIN Front-mount

Installation with the rubber bush

Removing the Unit

After inserting the holder into the dash-

board, then select the appropriate tabs

according to the thickness of the dash-

board material and bend them.

(Install as firmly as possible using the

top and bottom tabs. To secure, bend

the tabs 90 degrees.)

182

Rubber bush

Screw

Dashboard

Holder

Pull out to remove the frame.

(When reattaching the frame, point the

side with a groove downwards and

attach it.)

Frame

Insert the supplied extrac-

tion keys into the unit, as

shown in the figure, until

they click into place.

Keeping the keys pressed

against the sides of the unit,

pull the unit out.

CRD3803A_inst_001_029_UK 4/1/03 2:22 PM Page 18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 171 172

Pas de commentaire

Pioneer AVIC900HVT Manuel d'utilisateur Page 18