Pioneer AVIC-F920BT Manuel d'utilisateur télécharger pdf (Page 141)

Adjusting the response

positions of the touch panel

(touch panel calibration)

If you feel that the touch panel keys on the

screen deviate from the actual positions that

respond to your touch, adjust the response po-

sitions of the touch panel screen.

p Do not use a sharp pointed tool such as a

ballpoint pen or a mechanical pen, which

could damage the screen.

1 Display the “System Settings” screen.

= For details, refer to Displaying the “System

Settings” screen on page 136.

2 Touch [Screen Calibration].

A message confirming whether to start the ca-

libration appears.

3 Gently touch the centre of + mark dis-

played on the screen.

The target indicates the order.

After you touch all marks, the adjusted posi-

tion data is saved.

p Do not turn off the engine while saving the

adjusted position data.

# Press the MODE button.

Returns to the previous adjustment position.

# Press and hold the MODE button.

Cancels the adjustment.

Setting the illumination colour

The illumination colour can be selected from 8

different colours. Furthermore, the illumina-

tion colour can be switched between these 8

colours in order.

Selecting the colour from the preset

colours

1 Display the “System Settings” screen.

= For details, refer to Displaying the “System

Settings” screen on page 136.

2 Touch [Illumi Color].

The “Illumination Color” screen appears.

3 Touch the colour you want.

Available options:

! Coloured keys: Selects the desired preset

colour

! Memory 1/Memory 2: Colours registered

in the memory

= For details, refer to Creating a user-de-

fined colour and storing it to memory on

this page.

! Scan: Shifts between the eight default col-

ours in sequence gradually.

! Eco: The colours change in the order of

white, red, amber, yellow, green, and blue

as the number of points in the “Eco Score”

increases.

p The illumination lights in white when

“Eco Score” is set to “Off” or when no

route is set.

Creating a user-defined colour and

storing it to memory

You can create a user-defined colour and set it

as the illumination colour.

1 Display the “System Settings” screen.

= For details, refer to Displaying the “System

Settings” screen on page 136.

2 Touch [Illumi Color].

The “Illumination Color” screen appears.

3 Touch [Custom].

The “Illumination Color” screen appears.

p If [Scan] is set, [Custom] cannot be se-

lected.

Engb

141

Chapter

27

Customising preferences

Customising preferences

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 199 200

Commentaires sur ces manuels

Pas de commentaire