Pioneer dvr-rt500 Manuel d'utilisateur télécharger pdf (Page 61)

Recording

8 : 00

11 : 00

9 : 00

10 : 00

Program 1

Prog.1

Deleted Parts

Non Recorded Portion Parts

Prog.2 Prog.3

Program 2

Program 3

Recording

Control Settings

10 Press  or  to select “REC MODE” and press

ENTER.

The recording modes for the media selected in “REC

TO” item are listed.

Select the recording mode and press ENTER.

For the recording modes in VCR, see page 48, and for

the recording modes in DVD, see page 52.

ENTER/

SELECT

RETURN BACK END

SELECT

SETUP

ENTER

TIMER REC SET

REC REC

TO MODE

TYPE

DATE (MM/DD)

START

END

REC TO

REC MODE

ONCE

DVD

11/20(TH)

08:00PM

09:30PM

SETUP MENU

11 Select “OK” and press ENTER.

The timer program is determined and the TIMER REC

SET screen appears again.

12 When you enter the other program for the

timer recording, repeat the steps 3 to 11.

13 Press SETUP.

The TIMER REC SET screen disappears and the display

will return to the normal screen.

14 Press TIMER REC. The timer indicator “

” will

appear on the display and the unit stands by for

recording.

• If the program is DVD recording only, the unit will

change to VCR mode automatically. (The DVD

mode cannot be selected.)

• If the program is VCR recording only, the unit will

change to DVD mode automatically. (The VCR

mode cannot be selected.)

• If the programs are DVD and VCR recording, the

unit will turn off. If you want to use the unit, press

TIMER REC again to deactivate the timer.

Checking or changing the timer recording

When you want to check the selected timer recording,

follow the steps 1 and 2 of “Setting timer recording” and

display the TIMER REC SET screen.

To change the timer recording, select the program to be

changed and press ENTER. The changing method is the

same as that for the recording a program for the first

time.

Cancelling the timer recording

Display the TIMER REC SET screen.

Select the program you want to cancel and press

CLEAR/CANCEL, then the selected program will be

erased from the timer recording list.

In case timer programs-overlap

Do not overlap timer programs as portions of the

conflicting programs will be lost. The first recording

time has priority over the next recording time as shown

in the diagram below.

In this case, the next recording time is delayed a

maximum of about 1 minute.

Note

•Recording starts a few seconds before the preset

starting time.

•You cannot use the timer recording for the both

DVD and VCR at the same time.

•You can playback the DVD during the VCR timer

recording, and you can playback the VCR during

the DVD timer recording.

• If a recordable tape is not inserted or no disc space

is available, the timer record indicator “

” flashes.

Replace the tape or disc to allow recording.

2D30901B_En_52_62 27/9/04, 17:5361

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 90 91

Commentaires sur ces manuels

Pas de commentaire

Pioneer dvr-rt500 Manuel d'utilisateur Page 61

Commentaires sur ces manuels

Produits connexes et manuels pour DVR de voiture Pioneer dvr-rt500