Pioneer SC-1224 Manuel d'utilisateur Page 102
- Page / 126
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
102
FAQ
13
Symptom Remedy
Certain listening modes or
HOME MENU items cannot be
selected.
When Operation Mode is set to Basic, the Pioneer-recommended settings are made and
not all of the functions can be used. To use all of the functions without restrictions, set
Operation Mode to Expert (see Operation Mode Setup on page 42 ).
Some functions cannot be selected, depending on the input signal and listening mode.
The volume level drops automati-
cally.
The temperature within the unit has exceeded the allowable value. Try moving the unit for
better ventilation (see Installing the receiver on page 9 ).
Volume seems different when input
is switched.
Set the Channel Level setting to ALL, then adjust the volume of the respective input
sources (see Input Volume Absorber on page 72 ).
When HDZONE is ON, multi-channel
audio sources are not output in the
main zone.
When HDZONE is selected in Speaker System and also the same HDMI input is selected
for both the main zone and HDZONE, 2-channel PCM audio sources are output from the
main zone as well. To output multi-channel audio sources, set HDZONE to OFF or change
the HDZONE input.
No HDZONE sound is output. With HDZONE, multi-channel audio may not be output. In this case, set the audio output
setting of your playback device to 2-channel PCM.
BT AUDIO terminal
Symptom Remedy
The Bluetooth wireless technology
device cannot be connected or oper-
ated. Sound from the Bluetooth wire-
less technology device is not emitted
or the sound is interrupted.
Check that no object that emits electromagnetic waves in the 2.4 GHz band (microwave
oven, wireless LAN device or Bluetooth wireless technology apparatus) is near the unit. If
such an object is near the unit, set the unit far from it. Or, stop using the object emitting
the electromagnetic waves.
Check that the Bluetooth wireless technology device is not too far from the unit and that
obstructions are not set between the Bluetooth wireless technology device and the unit.
Set the Bluetooth wireless technology device and the unit so that the distance between
them is less than about 10 m and no obstructions exist between them.
The Bluetooth wireless technology device may not be set to the communication mode
supporting the Bluetooth wireless technology. Check the setting of the Bluetooth wireless
technology device.
Check that pairing is correct. The pairing setting was deleted from this unit or the Blue-
tooth wireless technology device. Reset the pairing.
Check that the profile is correct. Use a Bluetooth wireless technology device that sup-
ports A2DP profile and AVRCP profile.
Video
Symptom Remedy
No image is output when an input is
selected.
Check the video connections of the source component.
For HDMI, or when V.CONV is set to OFF and a TV and another component are con-
nected with different cords (in Setting the Video options on page 70 ), you must connect
your TV to this receiver using the same type of video cable as you used to connect your
video component. For the component video input, however, signals are only output from
the HDMI output, so when using the component video input, set V.CONV to ON.
Make sure the input assignment is correct for components connected using component
video or HDMI cables (see The Input Setup menu on page 41 ).
Check the video output settings of the source component.
Check that the video input you selected on your TV is correct.
Some components (such as video game units) have resolutions that may not be con-
verted. If adjusting this receiver’s Resolution setting (in Setting the Video options on
page 70 ) and/or the resolution settings on your component or display doesn’t work, try
switching V.CONV (in Setting the Video options on page 70 ) to OFF.
When the HDMI OUT 1/2 setting of the output parameter function is set to OFF, set it to
ON.
If HDZONE is set to on, video images connected using a video cable or component cable
are not output from the HDMI terminal. To output video images, turn HDZONE off (page
73 ).
Noisy, intermittent, or distorted
picture.
Sometimes a video deck may output a noisy video signal (during scanning, for example),
or the video quality may just be poor (with some video game units, for example). The
picture quality may also depend on the settings, etc. of your display device. Switch off
the video converter and reconnect the source and display device using the same type of
connection (component or composite), then start playback again.
Video signals are not output from the
component terminal.
When a monitor only compatible with resolutions of 480i is connected to the component
terminal and another monitor is connected to the HDMI terminal, the video signals may
not be output to the monitor connected to the component terminal. If this happens, do
the following:
— Turn off the power of the monitor connected to the HDMI terminal.
— Change the VIDEO P. menu RES setting (see Setting the Video options on page 70 ).
— Video signals from the HDMI terminal cannot be output to the component terminals.
Input the video signals from the player or other source to the composite or component
terminals. When using the component terminal, assign it at Input Setup (see The Input
Setup menu on page 41 ).
The picture’s movement is unnatu-
ral.
When Resolution under VIDEO PARAMETER is set to 1080/24p or 4K/24p, the picture
may not be displayed properly for some source materials. In this case, set the resolution
to something other than 1080/24p or 4K/24p (page 70 ).
Video parameters cannot be used. For audio only input (TUNER, CD, and TV), the video parameter function cannot be used.
Use for video or input with a GUI display.
Cannot be used when the HDZONE is ON. Turn OFF the HDZONE.
- 12 24-K/-S 1
- 2024-K/-S 1
- VENTILATION CAUTION 2
- Operating Environment 2
- Contents 3
- 11 The Advanced MCACC menu 4
- 14 Additional information 4
- Important 5
- Our philosophy 7
- Features 7
- Connectivity 8
- Playback/Processing 8
- Installation 8
- Handling the CD-ROM 9
- Before you start 10
- Controls and displays 11
- 21 3 108654 11912 13 14 14
- 19 2016 17 18 14
- Front panel 15
- Connecting your equipment 17
- Rear panel 18
- Bare wire connections 21
- Standard surround connection 22
- Bi-amping your speakers 22
- Selecting the Speaker system 23
- About the audio connection 23
- About the video converter 24
- Connecting using HDMI 25
- Select one 27
- HDMI/DVI-compatible monitor 28
- CD player, etc 29
- 75 Ω coaxial cable 30
- Outdoor antenna 30
- Indoor antenna 30
- (vinyl-coated wire) 30
- 5 m to 6 m 30
- Making MULTI-ZONE connections 31
- Sub zone (ZONE 2) Main zone 32
- Sub zone (ZONE 3) Main zone 32
- Sub zone (HDZONE) Main zone 32
- USB mass 34
- Connecting to a wireless LAN 35
- Closet or shelving unit 36
- Non-Pioneer 36
- IR receiver 36
- Basic Setup 37
- (Example Text Display) 38
- Microphone 39
- The Input Setup menu 41
- Operation Mode Setup 42
- About the Home Menu 43
- Basic playback 44
- Playing a source 45
- Playing an iPod 46
- ENTER, d 47
- About playable file formats 48
- Listening to the radio 49
- Remote control operation 51
- Radio wave caution 52
- Listening to your system 53
- Auto playback 54
- Standard surround sound 54
- Using Stream Direct 55
- Selecting MCACC presets 56
- Choosing the input signal 56
- Authorizing this receiver 58
- About HTC Connect 59
- Basic playback controls 59
- CAUTION 60
- About network playback 61
- Music files 62
- Control with HDMI function 63
- HDMI Setup 64
- Sound Retriever Link 65
- Stream Smoother Link 66
- Using other functions 67
- Audio parameter menu 68
- Video parameter menu 70
- Switching the HDMI output 72
- Input Volume Absorber 72
- ZONE 2 remote controls 73
- ZONE 3 remote controls 73
- HDZONE remote controls 73
- 30 min 60 min 74
- Off 90 min 74
- Default system settings 75
- About the Remote Setup menu 77
- Operating multiple receivers 77
- This receiver’s 78
- Other remote 78
- Default preset codes 79
- Controlling components 80
- Audio/Video components 81
- TV (Projector) 81
- The Advanced MCACC menu 82
- Automatic MCACC (Expert) 83
- Fine Channel Level 85
- Fine Speaker Distance 85
- Standing Wave 86
- Speaker Setting 87
- Channel Level 87
- Data Management 88
- Speaker system setting 90
- Speaker Distance 91
- IP address/Proxy setting 92
- Network Standby 92
- Friendly Name 92
- Parental Lock 93
- Port Number Setting 93
- Auto Power Down 94
- Volume Setup 94
- Remote Control Mode Setup 94
- Software Update 95
- ZONE Setup 95
- On Screen Display Setup 96
- Play ZONE Setup 96
- Maintenance Mode 96
- Troubleshooting 100
- No sound 100
- Symptom Remedy 101
- Other audio problems 101
- BT AUDIO terminal 102
- Settings 103
- Remote control 104
- Built-in AVNavigator 105
- USB interface 106
- Symptom Cause Remedy 107
- Wireless LAN 108
- Additional information 109
- Surround sound formats 110
- SABRE DAC 110
- About HDMI 110
- HTC Connect 110
- About iPod 111
- Windows 8 111
- About aptX 111
- Software license notice 112
- Speaker Setting Guide 113
- Configuration A 114
- Configuration B 114
- 1999/5/EC 115
- Glossary 116
- Features index 118
- Specifications 119
- Preset code list 121
- DVR (BDR, HDR) 123
- Satellite Set Top Box 124
- X-Box 2313 125
- All rights reserved 126
- <ARB7569-A> 126
Produits connexes et manuels pour Récepteurs AV Pioneer SC-1224
(40 pages)
(145 pages)
(38 pages)
(41 pages)
(38 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.811 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels