Pioneer AVIC-F910BT Manuel d'utilisateur Page 136

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 170
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 135
Nothing is displayed and the
touch panel keys cannot be
used.
The setting for the rear view camera
is incorr ect.
Select the appropriate setting for the rear
view camera.
The gearstick was placed in [R]
when the rear view camera was not
connected.
Press the MAP button, and then press the
MENU button to return to the Top Menu
and then select the correct polarity setting for
[Back Camera]. (Page 119)
There is no response when the
touch panel key are touched, or
a different key responds.
The touch panel keys deviate from
the actual positions that respond to
your touch for some reason.
Perform touch panel calibration. (Page 120)
The external storage device
(USB, SD) cannot be used.
The USB storage device has been
removed immediately after plugging
it.
Park your vehicle in a safe place, and turn off
the engine. Turn the ignition key back to Acc
off. Then start the engine again, and turn the
power to the navigation system back on.
Problems in the AV screen
Symptom Cause Action (Reference)
CD or DVD playback is not pos-
sible.
The disc is inserted upside down. Insert the disc with the label upward.
The disc is dirty. Clean the disc.
The disc is cracked or otherwise da-
maged.
Insert a normal, round disc.
The files on the disc are an irregular
file format.
Check the file format.
The disc format cannot be played
back.
Replace the disc.
The loaded disc is a type this system
cannot play.
Check what type of disc it is. (For more cau-
tions about handling each type of media,
refer to Page 149.)
The screen is covered by a cau-
tion message and the video can-
not be shown.
The handbrake lead is not con-
nected or applied.
Connect the handbrake lead correctly, and
apply the handbrake.
The handbrake interlock is acti-
vated.
Park your vehicle in a safe place and apply
the handbrake.
No video output from connected
equipments.
No video output from connected
iPod.
[AV1 Input]or[AV2 Input] setting
is incorr ect.
Correct the settings. (Page 105)
The connection of the USB interface
cable for iPod is incorrect.
Connect both the USB plug and the RCA
cable side. (If only one of these connection
has been made, the iPod will not work prop-
erly.) (Page 14)
The audio or video skips. The navigation system is not firmly
secured.
Secure the navigation system firmly.
No sounds are produced.
The volume level will not rise.
Cables are not connected correctly. Connect the cables correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-Video.
There is no sound during still, slow motion, or
frame-by-frame playback with DVD-Video.
The system is paused or performing,
fast reverse or forward during the
disc playback.
For the media other than music CD (CD-DA),
there is no sound on fast reverse or forward.
Appendix
Engb
136
Appendix
Vue de la page 135
1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 169 170

Commentaires sur ces manuels

Pas de commentaire