Pioneer AVIC-F910BT Manuel d'utilisateur télécharger pdf (Page 128)

Switching the sound muting/

attenuation

You can select the muting method when the

navigation guidance is output. This setting is

also effective for a mute signal that has been

received from the MUTE lead connected to the

navigation system.

p When you use a mobile phone connected

with Bluetooth technology (dialling, talking,

incoming call), the AV source volume is al-

ways muted independently of this setting.

% Touch [MUTE Input/GUIDE] on the “AV

System Settings” menu.

= For details, refer to Displaying the “AV Sys-

tem Settings” menu on page 126.

Each touch of [MUTE Input/GUIDE] changes

the setting as follows:

! MUTE — Muting

! ATT — Attenuation

! Normal — Volume does not change

p Operation returns to normal when the cor-

respond action is ended.

p When “SD” or “USB” selected as the AV

source, the sounds are not muted or attenu-

ated even when the navigation guidance

and beep outputs.

p When “SD” or “USB” is selected as the AV

source, the AV sounds, the navigation gui-

dance and beep sounds are mixed and the

volume can be adjusted simultaneously.

Important Notice regarding Volume of

Navigation Voice Guidance when Playing

Audio Files from USB or SD

If music files stored on an external storage device

(USB, SD) are played when the system guides the

route (i.e., a destination has been selected and

the system is routing you to a destination), the vo-

lume of the navigation guidance voice will be the

same as the volume of the music files being

played, even if a different volume level has been

selected on “Master” or “Voice” or “Dynamic Vo-

lume” in the “Sound settings” menu.

Setting the rear output

The navigation system’s rear output can be

used for a full-range speaker or subwoofer

connection. If you switch Rear SP to Sub W,

you can connect a rear speaker lead directly to

a subwoofer without using an auxiliary amp.

Initially, the navigation system is set for a rear

full-range speaker connection (Full).

p AVIC-F9110BT is not compatible with the

wiring that the subwoofer is directly con-

nected to rear speaker leads. Always use

the setting with [Full].

1 Touch [Rear SP] on the “AV System Set-

tings” menu.

= For details, refer to Displaying the “AV Sys-

tem Settings” menu on page 126.

2 Touch [Rear SP] to switch the rear out-

put setting.

When no subwoofer is connected to the rear

output, select Full.

When a subwoofer is connected to the rear

output, select Sub W.

p Both rear speaker leads output and RCA

rear output are switched simultaneously in

this setting. (When you use the product

without RCA rear output, this setting only

applies to the rear speaker leads.)

Switching Auto PI seek

The navigation system can automatically

search for a different station with the same

programming, even during preset recall.

% Touch [Auto PI] on the “AV System Set-

tings” menu.

= For details, refer to Displaying the “AV Sys-

tem Settings” menu on page 126.

Touching [Auto PI] switches between [On]

and [Off].

Customising preferences

Engb

128

Chapter

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 169 170

Commentaires sur ces manuels

Pas de commentaire

Pioneer AVIC-F910BT Manuel d'utilisateur Page 128

Commentaires sur ces manuels

Produits connexes et manuels pour Multimédia automobile Pioneer AVIC-F910BT