Pioneer DEH-P4900IB Manuel d'utilisateur télécharger pdf (Page 24)

Setting the rear output and

subwoofer controller

This unit’s rear output (rear speaker leads out-

put and RCA rear output) can be used for full-

range speaker (REAR SP FULL) or subwoofer

(REAR SP S/W) connection. If you switch the

rear output setting to REAR SP S/W, you can

connect a rear speaker lead directly to a sub-

woofer without using an auxiliary amp.

Initially, the unit is set for rear full-range speak-

er connection (REAR SP FULL). When rear out-

put is connected to full range speakers (when

REAR SP FULL is selected), you can connect

other full range speakers (PREOUT FULL)ora

subwoofer (PREOUT S/W) to the RCA rear out-

put.

1 Press FUNCTION to select

S/W CONTROL.

2 Press a or b to switch the rear output

setting.

Pressing a or b will switch between

REAR SP FULL (full-range speaker) and

REAR SP S/W (subwoofer) and that status will

be displayed.

# When no subwoofer is connected to the rear

output, select REAR SP FULL.

# When a subwoofer is connected to the rear

output, set for subwoofer REAR SP S/W.

# When the rear output setting is REAR SP S/W,

you cannot operate the following procedure.

3 Press c or d to switch the subwoofer

output or rear output.

Pressing c or d will switch between

PREOUT S/W and PREOUT FULL and that sta-

tus will be displayed.

Notes

! Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to Using subwoofer output on page

20).

! If you change this setting, subwoofer output

in the audio menu return to the factory set-

tings.

Multi language display setting

Text information such as title name, artist

name or comment can be recorded on a com-

pressed audio disc.

This unit can display them even if they are em-

bedded in either European language or Rus-

sian language.

! If embedded language and selected lan-

guage setting are not consistent with each

other, text information may not be dis-

played properly.

! Some characters may not be displayed

properly.

1 Press FUNCTION to select TITLE.

2 Press c or d to select the language.

EUROPEAN (European language)—RUSSIAN

(Russian language)

Switching the feature demo

The feature demo automatically starts when

power to this unit is turned off while the igni-

tion switch is set to ACC or ON.

1 Press FUNCTION to select

DEMONSTRATION.

2 Press a or b to turn DEMONSTRATION

on or off.

Notes

! Remember that if the feature demo continues

operating when the car engine is turned off, it

may drain battery power.

! You can also turn on or off feature demo by

pressing 6 while this unit is turned off. For

more details, see About the demo mode on

page 6.

Operating this unit

En

24

Section

02

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 80 81

Commentaires sur ces manuels

Pas de commentaire