Pioneer DEH-P4900IB Manuel d'utilisateur télécharger pdf (Page 19)

# When selecting the FM tuner as the source,

you cannot switch to SLA.

# To return to the display of each source, press

BAND.

# If you do not operate the audio function within

about 30 seconds, the display is automatically re-

turned to the source display.

Using balance adjustment

You can change the fader/balance setting so

that it can provide you an ideal listening envir-

onment in all occupied seats.

1 Press AUDIO to select FADER.

# If the balance setting has been previously ad-

justed, BALANCE will be displayed.

2 Press a or b to adjust front/rear speak-

er balance.

FADER FRONT 15 to FADER REAR 15 is dis-

played as the front/rear speaker balance

moves from front to rear.

# FADER 0 is the proper setting when only two

speakers are used.

# When the rear output setting is REAR SP S/W,

you cannot adjust front/rear speaker balance.

Refer to Setting the rear output and subwoofer

controller on page 24.

3 Press c or d to adjust left/right speaker

balance.

BALANCE LEFT 15 to BALANCE RIGHT 15 is

displayed as the left/right speaker balance

moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

Recalling equalizer curves

There are six stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display Equalizer curve

POWERFUL Powerful

NATURAL Natural

VOCAL Vocal

CUSTOM Custom

FLAT Flat

SUPERBASS Super bass

! CUSTOM is an adjusted equalizer curve

that you create. If you make adjustments to

an equalizer curve, the equalizer cur ve set-

ting will be memorized in CUSTOM.

! When FLAT is selected no supplement or

correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

FLAT and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

POWERFUL—NATURAL—VOCAL—CUSTOM

—FLAT—SUPERBASS

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

1 Press AUDIO to select EQ.

2 Press c or d to select the equalizer

band to adjust.

EQ-LOW (low)—EQ-MID (mid)—EQ-HIGH

(high)

3 Press a or b to adjust the level of the

equalizer band.

+6 to –6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust

the level.

Note

If you make adjustments, CUSTOM curve is up-

dated.

Operating this unit

En

19

English

Section

02

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 80 81

Commentaires sur ces manuels

Pas de commentaire