Pioneer SUPER TUNERIII DEH-P8500MP Manuel d'utilisateur télécharger pdf (Page 33)

Audio Adjustments

Section

m

Introduction of audio

adjustments

(D Audio display

Shows the audio adjustments status.

(D Preset equalizer indicator

Shows which equalizer preset is currently

selected.

d) ASL indicator

Shows when the automatic sound levelizer

is turned on.

1 Press OPEN to open the front panel.

2 Press AUDIO to display the audio func

tion names.

Press AUDIO repeatedly to switch between

the following audio functions:

Fad (balance adjustment)—EQ (equalizer

curve adjustment)—Bass (bass)—^Treble (tre

ble)—Loud (loudness)—Sub-W1 (subwoofer

on/off setting)/NonFad (non fading output on/

off setting)—Sub-W2 (subwoofer setting)/

NonFad (non fading output setting)—HPF

(high pass filter)—SLA (source level adjust

ment)—ASL (automatic sound levelizer)

■ When the subwoofer controller setting is only

S.W ControhEXT, you cannot switch to Sub-W1.

(Refer to page 41.)

■ You can select the Sub-W2 only when sub

woofer output is turned on in the Sub-W1.

■ When the subwoofer controller setting is only

S.W ControhEXT, you can switch to the non fad

ing output on/off setting. (Refer to page 41.)

■ You can select the non fading output setting

only when non fading output is turned on in the

non fading output on/off setting.

■ When selecting the FM tuner as the source,

you cannot switch to SLA.

■ To return to the display of each source, press

BAND

Note

If you do not operate the audio function within

about 30 seconds, the display is automatically re

turned to the source display. S

Setting the sound focus

equalizer (SFEQ)

Clarifying the sound image of vocals and in

struments allows the simple staging of a nat

ural, pleasant sound environment. Even

greater listening enjoyment will be obtained if

seating positions are chosen carefully.

FRT1

boosts the treble on the front output and the

bass on the rear output. FRT2 boosts the treble

and the bass on the front output and the bass

on the rear output. (The bass boost is the

same for both front and rear.) For both FRT1

and FRT2, H setting provides a more pro

nounced effect than L setting.

1 Press EQ and hold until SFEQ appears in

the display.

2 Press EQ to select the desired SFEQ set

ting.

Press EQ repeatedly to switch between the fol

lowing settings:

FRT1-H (front 1-high)—FRT1-L (front 1-low)

—FRT2-H (front 2-high)—FRT2-L (front 2-low)

—CUSTOM (custom)—SFEQ OFF (off)

m

3

(O

En

(33)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 62 63

Commentaires sur ces manuels

Pas de commentaire